Silicone brake fluid DOT 5 - 1L
" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "
(44,96 € HT)
RIGHT rear brake cylinder 20.6 mm - Renault 4 CV - 02/56 to end
RIGHT rear brake cylinder 20.6 mm - Renault 4 CV - 02/56 to end
" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 3/8
Set of 4 front brake shoes in standard exchange. (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets damaging the drums. Micro blunt brake shoes.(Non contractual photo)

Adapter fitting 3/8 UNF Male - 10x100 female
7/16 banjo fitting + 7/16 hollow screw + sealsDiameter male thread of the screw 11 mm
Made-to-measure front or rear brake hose. A simple call will allow us to determine your type of hose and its length.Same price as a standard model. Citreon HY, type H, HZ, HW.Image not contractual.
" Complete master cylinder for Peugeot 203 Piston 1 p or 25.4 mm Outlet 1/2 20 f per inch Inlet 17 mm approximately Center distance 60 mm for M 8 screws "

Rigid brake line nut. 1 / 2-20 UNF i.e. Ø 12.5 mm - drilling for 8 mm tube special brake reservoir
Total length 384 cm - 2 x 76 cm cables - with centering bracketConnects the two rear wheels
" Brake line remanufactured on request, only in copper diameter 6.35 mm. . Provide model (length and 2 original end caps) Shipment after receipt of your model. "
Rear brake cylinder 19 mm - Renault 4CV - 02/53 to 01/1956

" Front wheel cylinder. Diam 1" "3/8 or 34.9 mm. Fixing by 2 M8 type screws - Ø liquid inlet = 7/16 p To recognize the model it is enough to measure the connection which is screwed in the entry of the cylinder = 11 mm. or look at the 3rd photo ...

Single piston cylinder with bleeder for front wheel - Ø 28.57 mm - Peugeot 404 ALL model except Thermostable - Upper left or right mounting - (2 upper cylinders and 2 lower cylinders are needed to equip the front) - French manufacture - NON ...

Master cylinder complete with bellows: D 1'1 / 4 or 31.75 mm - inlet 3/4 - 16 f outlet 1/2 - 20fEntry in 18 mm. If the old model was 22mm, order the adapter here.Peugeot 202 UH

Front brake cylinder 22 mm -

Set of 2 Ducellier alternator brushes ref 19.709For Ducellier 7340 dynamos2 x brushes N ° 3G 32.166 (19.637)For Simca 1300 1301 1500 1501
Sealed ring (oil seal) for rear wheel shaft (mounted in the axle).53x68x132 per vehicle.