Pipe Ø 8 mm from reservoir to master cylinder - 1 m
Brake line remanufactured upon request, exclusively in 8 mm diameter copper.Photo not contractually binding. Supplied WITHOUT fittings - you can order the one you need from our store (for the master cylinder side). The other end is bare (inlet on ...
€50.40 TTC
(42,00 € HT)
(42,00 € HT)
front brake cylinder 34.9mm - citroen U23
Front brake cylinder d 34.93 mm (1'3 / 8). French made
€102.60 TTC
(85,50 € HT)
(85,50 € HT)
rear brake cylinder 38.1mm - citroen U23
Rear brake cylinder d 38.10 mm. French made
€129.60 TTC
(108,00 € HT)
(108,00 € HT)
Master cylinder 38.1 mm - Citroen U23
Fit to Citroen U23 and other derivatives. Fixing 3 symmetrical holes. Complete master cylinder. d 38.1 mm. 3-hole fixing. 3 side outlets and 1 at the end.Depending on the model, order the set of 3 plugs + gaskets to close the unnecessary outlets. ...
€205.20 TTC
(171,00 € HT)
(171,00 € HT)
Banjo adapter for master cylinder 18mm
" Adapter allowing to connect the inlet of a master cylinder in 18 mm on the original tube which goes to the jar. When the old models are in diam. 22mm, the adapter is essential to connect the tube coming from from the jar. The set consists of: 2 ...
€50.40 TTC
(42,00 € HT)
(42,00 € HT)
Brake line - from 100 to 150 cm
" Brake line remanufactured on request, only in copper diameter 6.35 mm. . Provide model (length and 2 original end caps) Shipment after receipt of your model. "
€62.04 TTC
(51,70 € HT)
(51,70 € HT)
Maître cylindre asymétrique 38.1 mm Citroen U23
Maître cylindre piston d 38.1 mm (1'1/2). Fixation 3 trous asymétriques. longeur 210 mm. Se monte sur Citroen U23 suivant version. Attention stock très réduit, nous consulter avant commande svp.
€306.00 TTC
(255,00 € HT)
(255,00 € HT)
Copper pipe fitting 7/16 - ext thread 11mm
Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm
€6.36 TTC
(5,30 € HT)
(5,30 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
€11.40 TTC
(9,50 € HT)
(9,50 € HT)
Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone
Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone
€18.00 TTC
(15,00 € HT)
(15,00 € HT)
Brake line - from 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 6.35 mm. Small model, length less than 50 cm. Provide model (length and 2 original tips) Shipping after receipt of your model.
€47.64 TTC
(39,70 € HT)
(39,70 € HT)
Raccord adaptateur 1/2 UNF mâle - 3/8 UNF femelle
Adaptateur freinage 1/2-20 UNF mâle par 3/8 24 filets femelle
€12.60 TTC
(10,50 € HT)
(10,50 € HT)
Front brake hose 470 mm Traction Citroen
Front brake hose length 470 mm. (Attention according to assembly exists in length 380 mm (available on the Shop)Traction 7.11 and 15 hp - U23 and HY
€30.00 TTC
(25,00 € HT)
(25,00 € HT)
Flexible front brake hose 380 mm - Citroen Traction
" Flexible front brake hose length 380 mm. (Attention depending on assembly exists in length 470 mm (available on the Shop) Traction 7.11 and 15 hp - U23 and HY "
€30.00 TTC
(25,00 € HT)
(25,00 € HT)
