Set of 4 relined front brake shoes Simca Chambord
" Set of 4 relined brake shoes (Av) for Simca V8 in standard exchange. Microblasting, varnish, industrial friction bonding. Strong adhesion. Eliminates the problem of rivets which can damage the drums. Shipping upon receipt of worn parts. "
€186.00 TTC
(155,00 € HT)
(155,00 € HT)
Front brake cylinder repair kit Ø 28.5 mm - Simca Chambord
Required overhaul for 1 front wheel cylinder. Diameter 28.57 mm
€24.42 TTC
(20,35 € HT)
(20,35 € HT)
Front brake cylinder Ø 28.5 mm - without bleeder (L and R) - Simca Chambord
Front wheel brake cylinder, without bleeder. Right or Left mounting. Diameter 28.57 mmLiquid inlet 3/8Simca Beaulieu, Chambord, Présidence as well as Ariane 4 and Ariane 8 - Simca 1300 until September 1965.
€62.40 TTC
(52,00 € HT)
(52,00 € HT)
Metal insert tip for jar
Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.
€10.80 TTC
(9,00 € HT)
(9,00 € HT)
Male thread brake reservoir
Brake fluid reservoir. Supplied with bracket, plug and 3/4 male connector 16 threads / p. External thread diameter = 18.5 mm. Delivered without caliper (fixing by the thread on the master cylinder). Lockeed and silicone compatible
€42.00 TTC
(35,00 € HT)
(35,00 € HT)
3/8 - 24 f copper pipe fitting
Rigid brake line nut. 3/8 x 24 threads / inch. Tube Ø 4.75 mm
€7.80 TTC
(6,50 € HT)
(6,50 € HT)
Brake switch - stop - DOT 3 and 4
" Brake switch. STOP light function - compatible with synthetic liquid type" "lockheed" "Dot 3 and 4. If using 100% silicone liquid: Choose this other reference 1/2 - 20 thread / inch thread "
€19.55 TTC
(16,29 € HT)
(16,29 € HT)
Rear brake cylinder L or R (incoming) 23.8 mm - Simca Chambord
Rear wheel cylinder. Left or Right mounting - Simca Beaulieu Chambord Presidence Marly Ariane 4 and Ariane 8. Diameter: 23.81 mm - Version with cone entering the bottom of the thread at the liquid inlet. See detail photo.
€61.50 TTC
(51,25 € HT)
(51,25 € HT)
Copper pipe fitting 7/16 - ext thread 11mm
Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm
€6.36 TTC
(5,30 € HT)
(5,30 € HT)
