Copper pipe fitting 7/16 - ext thread 11mm
Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm
€6.36 TTC
(5,30 € HT)
(5,30 € HT)
Front brake cylinder repair kit Ø 28.5 mm - Simca Chambord
Required overhaul for 1 front wheel cylinder. Diameter 28.57 mm
€24.42 TTC
(20,35 € HT)
(20,35 € HT)
Male thread brake reservoir
Brake fluid reservoir. Supplied with bracket, plug and 3/4 male connector 16 threads / p. External thread diameter = 18.5 mm. Delivered without caliper (fixing by the thread on the master cylinder). Lockeed and silicone compatible
€42.00 TTC
(35,00 € HT)
(35,00 € HT)
Front brake hose 349 mm Simca Versailles Chambord Ariane
Front brake hose 349 mm long. (The vehicle has 2 front hoses) Ø 3/8 For Simca V8, Versailles, Regence, Chambord, Présidence, Trianon, Marly, Ariane 4 and Ariane 8, etc.
€32.40 TTC
(27,00 € HT)
(27,00 € HT)
Silicone brake fluid DOT 5 - 1L
" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "
€53.95 TTC
(44,96 € HT)
(44,96 € HT)
Special brake grease tube - Plastilub ATE - 75 ml
Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!
€13.80 TTC
(11,50 € HT)
(11,50 € HT)
Master cylinder 22mm Simca Chambord 04/1960 to end
" Complete master cylinder D 22 mm. Outlet in 7/16 20f / p - Delivered complete with adapter and vertical outlet (as the photo) For Simca V8 (Beaulieu Chambord, Présidence, Marly, Ariane 4 and Ariane 8, etc.) from April 1960 until the end of ...
€105.60 TTC
(88,00 € HT)
(88,00 € HT)
Front brake cylinder L Ø 28.5 mm - with bleeder - Simca Chambord
" Left front wheel brake cylinder, equipped with a bleeder - Simca Beaulieu, Chambord, Présidence, Marly 2, Ariane 4 and Ariane 8 - Simca 1300 until sept. 1965 Diameter 28.57 mm "
€67.80 TTC
(56,50 € HT)
(56,50 € HT)
Metal insert tip for jar
Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.
€10.80 TTC
(9,00 € HT)
(9,00 € HT)
Front brake cylinder D Ø 28.5 mm - with Simca Chambord bleeder
" Front right wheel brake cylinder, equipped with a bleeder - Simca Beaulieu, Chambord, Présidence, Marly 2, Ariane 4 and Ariane 8 - Simca 1300 until September 1965 Diameter 28.57 mm "
€67.80 TTC
(56,50 € HT)
(56,50 € HT)
Front brake cylinder Ø 28.5 mm - set of 4 - Simca Chambord
Set of 4 front brake cylinders. -Simca Beaulieu, Chambord, Présidence as well as Ariane 4 and Ariane 8 - Simca 1300 until September 1965.Comprises: one cylinder with left bleed, one with right bleed and two cylinders without bleed.Diameter 28.57 ...
€261.60 TTC
(218,00 € HT)
(218,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
€11.40 TTC
(9,50 € HT)
(9,50 € HT)
