Upper front cylinder L or R - Peugeot 404 ALL model except Thermostable

Single piston cylinder with bleeder for front wheel - Ø 28.57 mm - Peugeot 404 ALL model except Thermostable - Upper left or right mounting - (2 upper cylinders and 2 lower cylinders are needed to equip the front) - French manufacture - NON ...

€61.50 TTC
(51,25 € HT)

Front lower brake cylinder L or R 28.5mm - Peugeot 404 ALL model except Thermostable

Single piston cylinder with bleeder for front wheel - 7/16 inlets - Lower front cylinder L or R - Peugeot 404 ALL model except Thermostable - Lower left or right assembly - (2 upper cylinders and 2 lower cylinders are required to equip the front) ...

€63.60 TTC
(53,00 € HT)

7/16 female connection on 6.35 mm tube

7/16 connection on 6.35 mm tube

Rear brake cylinder - 25.4mm - Peugeot 404 (click on detail)

Rear wheel cylinder d 25.4mm, inclined pipe inlet 7/16 e piston Ø 25.4 mm.Exiting cone visible at the bottom of the liquid inlet on the cylinder.404 assembly:- petrol sedan: start at 10/67- Diesel sedan: start at 09/68- Coupe convertible ...

€60.60 TTC
(50,50 € HT)

Copper gasket 10 x 18

Copper gasket 18x10 mm thickness 1mm

€2.16 TTC
(1,80 € HT)

Male thread brake reservoir

Brake fluid reservoir. Supplied with bracket, plug and 3/4 male connector 16 threads / p. External thread diameter = 18.5 mm. Delivered without caliper (fixing by the thread on the master cylinder). Lockeed and silicone compatible

Copper gasket 13.1 x 18

Copper gasket 13.1 x 18 mm thickness 1mm

€1.92 TTC
(1,60 € HT)

Front brake hose 356 mm - Peugeot 404 sedan - injection coupé cabriolet according to year

Front brake hose, length 412 mm - please check the correspondence with your model before ordering.- 404 Saloon 07/60 end of series- 404 Sedan and diesel 09/63 to 10/65- Injection sedan, coupe and convertible 04/62 end of series EXCEPT ...

Contactor: copper seal kit for LONG stop contactor 022114

Set of 2 seals for STOP LONG contactor

€3.60 TTC
(3,00 € HT)

Set of 4 rear brake shoes Peugeot 404

Set of 4 REAR brake shoes relined, in standard exchange. Peugeot 403 (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished jaws.(Non ...

€132.00 TTC
(110,00 € HT)

Brake hose 380 mm - 3/8 - Peugeot 404

Flexible 380 mm - 3/8

Copper gasket 11.50 x 20

Copper gasket 20x11.50 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

FRONT brake spring kit - Peugeot 404 - WITHOUT hydrovac

Brake spring kit for front wheels WITHOUT hydrovac Peugeot 404

Copper gasket 15.3 x 21

Copper gasket 15.30 x 21.00 th 1mm

€1.80 TTC
(1,50 € HT)

Ecrou

Rear brake springs and clips kit - Peugeot 404 all models

Rear brake springs and clips kit - Peugeot 404 all models