Set of 4 rear brake shoes Peugeot 404
Set of 4 REAR brake shoes relined, in standard exchange. Peugeot 403 (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished jaws.(Non ...
€132.00 TTC
(110,00 € HT)
(110,00 € HT)
Rear brake hose 460 mm - Peugeot 404 sedan injection coupe cab (depending on the year)
Front brake hose 460 mm long - please check the correspondence with your model before ordering.- 404 Sedan start at 02/63- 404 Sedan and diesel 09/63 to 10/65- Injection sedan, coupe and convertible 04/62 end of series- For other models, please ...
€43.20 TTC
(36,00 € HT)
(36,00 € HT)
Copper gasket 11.50 x 20 for front brake hose - Peugeot 404
Copper gasket 20x11.50 mm thickness 1mm
€1.80 TTC
(1,50 € HT)
(1,50 € HT)
Brake switch - stop - DOT 3 and 4
" Brake switch. STOP light function - compatible with synthetic liquid type" "lockheed" "Dot 3 and 4. If using 100% silicone liquid: Choose this other reference 1/2 - 20 thread / inch thread "
€19.55 TTC
(16,29 € HT)
(16,29 € HT)
Front lower brake cylinder L or R 28.5mm - Peugeot 404 ALL model except Thermostable
Single piston cylinder with bleeder for front wheel - 7/16 inlets - Lower front cylinder L or R - Peugeot 404 ALL model except Thermostable - Lower left or right assembly - (2 upper cylinders and 2 lower cylinders are required to equip the front) ...
€63.60 TTC
(53,00 € HT)
(53,00 € HT)
Brake reservoir - male thread + electrical contact
Brake fluid reservoir, translucent plastic. With cap, and electrical contact for low fluid level
€47.40 TTC
(39,50 € HT)
(39,50 € HT)
FRONT brake spring kit - Peugeot 404 - WITHOUT hydrovac
Brake spring kit for front wheels WITHOUT hydrovac Peugeot 404
€24.40 TTC
(24,40 € HT)
(24,40 € HT)
Contactor: copper seal kit for LONG stop contactor 022114
Set of 2 seals for STOP LONG contactor
€3.60 TTC
(3,00 € HT)
(3,00 € HT)
Silicone brake fluid DOT 5 - 1L
" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "
€53.95 TTC
(44,96 € HT)
(44,96 € HT)
Thermostable rear brake cylinder Ø 19.00 mm - Peugeot 404
Rear wheel cylinder L or R Ø 19 mm. Liquid inlet 3/8 - French manufacturing
€55.56 TTC
(46,30 € HT)
(46,30 € HT)
Brake switch - stop - special silicone
Brake switch. STOP light function. 100% silicone liquid and LHM compatible1/2 - 20 thread / inch thread
€19.55 TTC
(16,29 € HT)
(16,29 € HT)
kit de reparation servofrein Hydrovac Ø 185 mm - Peugeot 404, Renault R8, Saviem
Hydrovac Ø 185 mm brake servo repair kit - Supplied with valve and residual valve.Peugeot 404, Renault R8, Saviem.
€190.00 TTC
(158,33 € HT)
(158,33 € HT)
Master cylinder 22mm - Peugeot 404 ALL models except Thermostable
Brake master cylinder 22mm - Peugeot 404 ALL models except Thermostable - Outlet Ø 1/2 20 f / p
€91.20 TTC
(76,00 € HT)
(76,00 € HT)
Viewed products
Cylinder head gasket 817 - Renault TP3 SG2
" Cylinder head gasket for Renault type 817 engine "
€96.00 TTC
(96,00 € HT)
(96,00 € HT)
Master cylinder kit Renault Colorale Prairie R2087 Goelette
Repair kit for 1 "1/4 or 31.75 mm master cylinder.
€58.80 TTC
(49,00 € HT)
(49,00 € HT)
Front hub kit Simca Versailles - Chambord 58/60
Front hub repair kit with D 19mm spindle, for Trianon, Versailles, Régence, Marly 1. All models (except 1954), including Chambord 58 to 601 outer conical bearing1 internal tapered bearing1 sealed ringValid for one wheel. Be careful not to fit on ...
€117.60 TTC
(98,00 € HT)
(98,00 € HT)
3/8 - 24 f copper pipe fitting
Rigid brake line nut. 3/8 x 24 threads / inch. Tube Ø 4.75 mm
€7.80 TTC
(6,50 € HT)
(6,50 € HT)
Flexible rear brake hose 349 mm Simca Versailles Chambord Ariane
Flexible rear brake hose 349 mm long. Male ext 9mm - female int Ø 8.3 mm. Don't forget to replace the copper gasket: click here a> (The vehicle has only 1 rear flexible) - Simca Beaulieu, Chambord, Présidence, Marly 2, Ariane 4 and ...
€32.40 TTC
(27,00 € HT)
(27,00 € HT)
demarreur adapatble 12 v SAVIEM moteur 671 /817
€276.00 TTC
(276,00 € HT)
(276,00 € HT)
Front brake cylinder 38.1 mm - SUMB Marmon
For Simca SUMB Marmon and other heavy-duty derivatives.Complete front wheel cylinder d 38mm.
€124.80 TTC
(104,00 € HT)
(104,00 € HT)
