Set of 48.00 mm connecting rod bearings - original STD dimension - Citroen Traction 11D - HY - U23 Mounts on engines equipped w
Hydrovac Ø 185 mm brake servo repair kit - Supplied with valve and residual valve.Peugeot 404, Renault R8, Saviem.
€158.33 TTC
(158,33 € HT)
(158,33 € HT)
Rear brake cylinder 25.4mm - Peugeot 404 - petrol berline 10/65 to 10/67
Rear brake cylinder - Ø 25.4 mm - Liquid inlet with outgoing cone - Peugeot 404 - petrol sedan 10/65 to 10/67Liquid inlet 3/8 - measurement on the male connection = 9.5 mm
€36.50 TTC
(36,50 € HT)
(36,50 € HT)
Contactor: copper seal kit for LONG stop contactor 022114
Set of 2 seals for STOP LONG contactor
€3.00 TTC
(3,00 € HT)
(3,00 € HT)
Rear brake cylinder - 25.4mm - Peugeot 404 (click on detail)
Rear wheel cylinder d 25.4mm, inclined pipe inlet 7/16 e piston Ø 25.4 mm.Exiting cone visible at the bottom of the liquid inlet on the cylinder.404 assembly:- petrol sedan: start at 10/67- Diesel sedan: start at 09/68- Coupe convertible ...
€41.94 TTC
(41,94 € HT)
(41,94 € HT)
Front brake hose 356 mm - Peugeot 404 sedan - injection coupé cabriolet according to year
Front brake hose, length 412 mm - please check the correspondence with your model before ordering.- 404 Saloon 07/60 end of series- 404 Sedan and diesel 09/63 to 10/65- Injection sedan, coupe and convertible 04/62 end of series EXCEPT ...
€35.00 TTC
(35,00 € HT)
(35,00 € HT)
THERMOSTABLE front brake cylinder - set of 4 - Peugeot 404
Set of 4 front brake cylinders Thermostable L or R - Peugeot 4041965 to 69
€408.24 TTC
(408,24 € HT)
(408,24 € HT)
THERMOSTABLE front brake cylinder - set of 4 - Peugeot 404
Set of 4 front brake cylinders Thermostable L or R - Peugeot 4041965 to 69
€166.25 TTC
(166,25 € HT)
(166,25 € HT)
Brake switch - stop - DOT 3 and 4
" Brake switch. STOP light function - compatible with synthetic liquid type" "lockheed" "Dot 3 and 4. If using 100% silicone liquid: Choose this other reference 1/2 - 20 thread / inch thread "
€12.15 TTC
(12,15 € HT)
(12,15 € HT)
Front brake spring kit - hydrovac - Peugeot 404 - 10/67 a 69
Hydrovac brake spring kit - front wheels - Peugeot 404 10/67 to 69
€20.00 TTC
(20,00 € HT)
(20,00 € HT)
Rear brake springs and clips kit - Peugeot 404 all models
Rear brake springs and clips kit - Peugeot 404 all models
€32.92 TTC
(32,92 € HT)
(32,92 € HT)
Brake reservoir - male thread + electrical contact
Brake fluid reservoir, translucent plastic. With cap, mounting bracket and electrical contact for low fluid level
€38.00 TTC
(38,00 € HT)
(38,00 € HT)
Silicone brake fluid DOT 5 - 1L
" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "
€39.90 TTC
(39,90 € HT)
(39,90 € HT)
- New
Rear brake hose 303 mm - Peugeot 404
Flexible 303 mm front404 Heat-stable sedan oct 1965 end of series404 Coupé Cabriolet Oct 1965 end of series
€35.00 TTC
(35,00 € HT)
(35,00 € HT)
Copper gasket 11.50 x 20 for front brake hose - Peugeot 404
Copper gasket 20x11.50 mm thickness 1mm
€1.50 TTC
(1,50 € HT)
(1,50 € HT)
Front lower brake cylinder L or R 28.5mm - Peugeot 404 ALL model except Thermostable
Single piston cylinder with bleeder for front wheel - 7/16 inlets - Lower front cylinder L or R - Peugeot 404 ALL model except Thermostable - Lower left or right assembly - (2 upper cylinders and 2 lower cylinders are required to equip the front) ...
€41.98 TTC
(41,98 € HT)
(41,98 € HT)
