Set of 4 rear brake shoes Peugeot 404

Set of 4 REAR brake shoes relined, in standard exchange. Peugeot 403 (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished jaws.(Non ...

€132.00 TTC
(110,00 € HT)

Ecrou

Thermostable rear brake cylinder Ø 19.00 mm - Peugeot 404

Rear wheel cylinder L or R Ø 19 mm. Liquid inlet 3/8 - French manufacturing

€55.56 TTC
(46,30 € HT)

Front brake hose 412 mm - Peugeot 404 sedan - debut a 07/60

Front brake hose, length 412 mm - please check the correspondence with your model before ordering.- 404 Sedan start at 07/60- For other models, please call us

Copper gasket 12 x 18 mm

Copper gasket 12 x18 x  1.5mm thick

€1.80 TTC
(1,50 € HT)

Front lower brake cylinder L or R 28.5mm - Peugeot 404 ALL model except Thermostable

Single piston cylinder with bleeder for front wheel - 7/16 inlets - Lower front cylinder L or R - Peugeot 404 ALL model except Thermostable - Lower left or right assembly - (2 upper cylinders and 2 lower cylinders are required to equip the front) ...

€63.60 TTC
(53,00 € HT)

Master cylinder 22mm - Peugeot 404 ALL models except Thermostable

Brake master cylinder 22mm - Peugeot 404 ALL models except Thermostable - Outlet Ø 1/2 20 f / p

€91.20 TTC
(76,00 € HT)

kit de reparation servofrein Hydrovac Ø 185 mm - Peugeot 404, Renault R8, Saviem

Hydrovac Ø 185 mm brake servo repair kit - Supplied with valve and residual valve.Peugeot 404, Renault R8, Saviem.

Copper gasket 16 x 21

Copper gasket 16 x 21 1.5mm thick

€1.80 TTC
(1,50 € HT)

Contactor: copper seal kit for LONG stop contactor 022114

Set of 2 seals for STOP LONG contactor

€3.60 TTC
(3,00 € HT)

Rear brake cylinder - 25.4mm - Peugeot 404 (click on detail)

Rear wheel cylinder d 25.4mm, inclined pipe inlet 7/16 e piston Ø 25.4 mm.Exiting cone visible at the bottom of the liquid inlet on the cylinder.404 assembly:- petrol sedan: start at 10/67- Diesel sedan: start at 09/68- Coupe convertible ...

€60.60 TTC
(50,50 € HT)

Brake switch - stop - DOT 3 and 4

" Brake switch. STOP light function - compatible with synthetic liquid type" "lockheed" "Dot 3 and 4. If using 100% silicone liquid: Choose this other reference 1/2 - 20 thread / inch thread "

Thermostable rear brake cylinder Ø 17.50 mm - Peugeot 404

Rear wheel cylinder Thermostable L or R Ø 17.50 mm - Peugeot 4041965 at the end of production

Dot 4 brake fluid

Dot 4 brake fluid - 500ml can. Non contractual photo

Silicone brake fluid DOT 5 - 1L

" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "

7/16 female connection on 6.35 mm tube

7/16 connection on 6.35 mm tube