- New
Cylinder - front or rear copper seals kit for one wheel - Peugeot 203 - all models
Set of 2 seals for hollow screw and banjo (for 1 cylinder)
€4.08 TTC
(3,40 € HT)
(3,40 € HT)
Adapter connection 7/16 male - 11/16 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 11/16 pour recevoir gros flexible (17mm mâle
€39.00 TTC
(32,50 € HT)
(32,50 € HT)
Special brake grease tube - Plastilub ATE - 75 ml
Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!
€13.80 TTC
(11,50 € HT)
(11,50 € HT)
Copper pipe fitting 7/16 - ext thread 11mm
Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm
€6.36 TTC
(5,30 € HT)
(5,30 € HT)
Pipe Ø 8 mm from reservoir to master cylinder - 1 m
Brake line remanufactured upon request, exclusively in 8 mm diameter copper.Photo not contractually binding. Supplied WITHOUT fittings - you can order the one you need from our store (for the master cylinder side). The other end is bare (inlet on ...
€50.40 TTC
(42,00 € HT)
(42,00 € HT)
Master cylinder 25.4 mm - Peugeot 203
" Complete master cylinder for Peugeot 203 Piston 1 p or 25.4 mm Outlet 1/2 20 f per inch Inlet 17 mm approximately Center distance 60 mm for M 8 screws "
€64.80 TTC
(54,00 € HT)
(54,00 € HT)
Set of 4 front brake shoes Peugeot 203
Set of 4 relined front brake shoes, in standard exchange. Peugeot 203 (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake ...
€96.00 TTC
(80,00 € HT)
(80,00 € HT)
Brake line - from 150 to 200 cm
Brake line re-manufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original end pieces)Shipping after receiving your model.
€69.24 TTC
(57,70 € HT)
(57,70 € HT)
7/16 banjo fitting + 7/16 hollow screw + seals
7/16 banjo fitting + 7/16 hollow screw + sealsDiameter male thread of the screw 11 mm
€32.82 TTC
(27,35 € HT)
(27,35 € HT)
copy of 3-way 3/8 24 f connector
3-way 3/8 connection 24 threads - generally at the outlet of the master cylinder
€36.00 TTC
(30,00 € HT)
(30,00 € HT)
Brake reservoir with rubber
Translucent tank, delivered with bracket; rubber plug and fitting.
€38.40 TTC
(32,00 € HT)
(32,00 € HT)
Câble frein AR - long 176 (jeu de 2) Peugeot 203
Jeu de 2 câble frein AR - Long 176 cm - Attention gaine longue (128 cm) véhicule type camionnette, plateau, ambulance U8, C8
€91.20 TTC
(76,00 € HT)
(76,00 € HT)
Brake line - from 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 6.35 mm. Small model, length less than 50 cm. Provide model (length and 2 original tips) Shipping after receipt of your model.
€47.64 TTC
(39,70 € HT)
(39,70 € HT)
Brake line - from 100 to 150 cm
" Brake line remanufactured on request, only in copper diameter 6.35 mm. . Provide model (length and 2 original end caps) Shipment after receipt of your model. "
€62.04 TTC
(51,70 € HT)
(51,70 € HT)
