Front brake cylinder 31.7mm -Panhard Dyna Z
Front wheel cylinder DYna Z Panhard - 1954 until June 1958 - d 31.75 mm
(44,50 € HT)

Cylinder - front copper seal kit for one wheel - Panhard Dyna Z
Set of 2 seals for hollow screw and banjo (for 1 cylinder)Internal Ø 11 mm and 15 mm
(3,40 € HT)

FRONT RIGHT 28.5mm brake cylinder- Panhard PL 17 - Record mounting - 04/62 and fin
Front wheel cylinder L PL 17 - Record mounting - 04/62 and fine - d 28.57 mm. RIGHT Mount64 mm long - inside liquid passage = 10 mm
(55,00 € HT)

Special brake grease tube - Plastilub ATE - 75 ml
Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!
(11,50 € HT)
Copper pipe fitting 7/16 - ext thread 11mm
Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm
(5,30 € HT)
Adapter fitting 7/16 Male - 7/16 female outgoing cone
Adapter fitting 7/16 Male - 7/16 female outgoing cone
(16,30 € HT)
Brake line - from 150 to 200 cm
Brake line re-manufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original end pieces)Shipping after receiving your model.
(57,70 € HT)
Adapter fitting 3/8 UNF Male - 10x100 female
Adapter fitting 3/8 UNF Male - 10x100 female
(17,50 € HT)
Rear brake cylinder 19mm - 3/8 Panhard 24 - 07/1964 to end
Rear wheel cylinder 19mm - Panhard 24 équipé frein à tambours - 07/1964 à fin de série
(57,60 € HT)

Master cylinder Panhard Dyna Record mount - 25.4 mm - DOT
Complete master cylinder for Dyna - Record type mounting. Includes:For DOT liquid use. Otherwise choose the reference for the 100% SILICONE liquid- master cylinder 25.4 mm- 3-way 7/16 connection- stop switch- 2 x copper gasket
(113,90 € HT)

Cylindre frein arrière 22 mm - Panhard Dyna Z - montage RECORD
Rear L and R brake cylinder Panhard Dyna - Diam 22mm - RECORD.Sold individually (1 cylinder per wheel)
(64,00 € HT)

Set of 4 relined brake shoes Panhard Dyna x86
Set of 4 relined brake shoes (front or rear) 195 mm x 30 mm in standard exchange for Panhard Dyna X86, Dyna Z, PL 17 and series 24Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could ...
(90,75 € HT)

Cylindre de frein avant Droit - d 31.75 mm - incliné - Panhard Z1
(114,00 € HT)
