Metal insert tip for jar

Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.

Copper gasket 16 x 21

Copper gasket 16 x 21 1.5mm thick

€1.80 TTC
(1,50 € HT)

Copper gasket 10.5 x 20

Copper gasket 10.5 x 20 thickness 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 19 x 24

Copper gasket 24x19 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Brake switch - stop - special silicone

Brake switch. STOP light function. 100% silicone liquid and LHM compatible1/2 - 20 thread / inch thread

Brake switch - stop - DOT 3 and 4

" Brake switch. STOP light function - compatible with synthetic liquid type" "lockheed" "Dot 3 and 4. If using 100% silicone liquid: Choose this other reference 1/2 - 20 thread / inch thread "

Brake switch - STOP - silicone fluid - 7 / 16-20 th / inch

Brake switch for silicone fluid. STOP light function - Simca Aronde (depending on year) and P60Thread 7/16 - 20 thread / inch

Copper gasket 12 x 18 mm

Copper gasket 12 x18 x  1.5mm thick

€1.80 TTC
(1,50 € HT)

Front brake hose 349 mm Simca Versailles Chambord Ariane

Front brake hose 349 mm long. (The vehicle has 2 front hoses) Ø 3/8 For Simca V8, Versailles, Regence, Chambord, Présidence, Trianon, Marly, Ariane 4 and Ariane 8, etc.

Master cylinder 22mm Simca Versailles Chambord

Complete master cylinder D 22 mm. For Simca V8 (Versailles, Chambord, Marly, Ariane 4 and Ariane 8 etc.) before April 1960. Output 1/2 20f / p

€91.20 TTC
(76,00 € HT)

Male thread brake reservoir

Brake fluid reservoir. Supplied with bracket, plug and 3/4 male connector 16 threads / p. External thread diameter = 18.5 mm. Delivered without caliper (fixing by the thread on the master cylinder). Lockeed and silicone compatible

cable frein à main secondaire - Simca Versailles chambord (sauf Rushmatic)

Copper pipe fitting 7/16 - ext thread 11mm

Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm

Brake reservoir - male thread + electrical contact

Brake fluid reservoir, translucent plastic. With cap, and electrical contact for low fluid level

Rear brake cylinder L or R (incoming) 23.8 mm - Simca Chambord

Rear wheel cylinder. Left or Right mounting - Simca Beaulieu Chambord Presidence Marly Ariane 4 and Ariane 8. Diameter: 23.81 mm - Version with cone entering the bottom of the thread at the liquid inlet. See detail photo.

€61.50 TTC
(51,25 € HT)

Copper gasket 10 x 18

Copper gasket 18x10 mm thickness 1mm

€2.16 TTC
(1,80 € HT)