Rear brake cylinder L or R (incoming) 23.8 mm - Simca Chambord

Rear wheel cylinder. Left or Right mounting - Simca Beaulieu Chambord Presidence Marly Ariane 4 and Ariane 8. Diameter: 23.81 mm - Version with cone entering the bottom of the thread at the liquid inlet. See detail photo.

€61.50 TTC
(51,25 € HT)

Copper pipe fitting 7/16 - ext thread 11mm

Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm

Rear brake cylinder L or R (outgoing) 23.8 mm - Simca Chambord

" Rear wheel cylinder. Left mount or Right - Simca Beaulieu, Chambord, Présidence, Ariane 4 and Ariane 8. Diameter: 23.81 mm. Version with cone protruding from the bottom of the thread at the liquid inlet. See detail photo. "

€62.40 TTC
(52,00 € HT)

Brake reservoir - male thread + electrical contact

Brake fluid reservoir, translucent plastic. With cap, and electrical contact for low fluid level

22mm master cylinder kit Simca Versailles Chambord

Complete overhaul kit for 22 mm master cylinder.

€31.20 TTC
(26,00 € HT)

Copper gasket 13.5x20.5

Copper gasket 13.50 x 20.50 th 1mm

€1.85 TTC
(1,54 € HT)

Dot 4 brake fluid

Dot 4 brake fluid - 500ml can. Non contractual photo

Master cylinder 22mm Simca Versailles Chambord

Complete master cylinder D 22 mm. For Simca V8 (Versailles, Chambord, Marly, Ariane 4 and Ariane 8 etc.) before April 1960. Output 1/2 20f / p

€91.20 TTC
(76,00 € HT)

Set of 4 relined front brake shoes Simca Chambord

" Set of 4 relined brake shoes (Av) for Simca V8 in standard exchange. Microblasting, varnish, industrial friction bonding. Strong adhesion. Eliminates the problem of rivets which can damage the drums. Shipping upon receipt of worn parts. "

€186.00 TTC
(155,00 € HT)

cable frein à main primaire - Simca Versailles chambord

Front brake cylinder D Ø 28.5 mm - with Simca Chambord bleeder

" Front right wheel brake cylinder, equipped with a bleeder - Simca Beaulieu, Chambord, Présidence, Marly 2, Ariane 4 and Ariane 8 - Simca 1300 until September 1965 Diameter 28.57 mm "

€67.20 TTC
(56,00 € HT)

Special brake grease tube - Plastilub ATE - 75 ml

Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!

Copper gasket 11.50 x 20

Copper gasket 20x11.50 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Front brake cylinder Ø 28.5 mm - without bleeder (L and R) - Simca Chambord

Front wheel brake cylinder, without bleeder. Right or Left mounting. Diameter 28.57 mmLiquid inlet 3/8Simca Beaulieu, Chambord, Présidence as well as Ariane 4 and Ariane 8 - Simca 1300 until September 1965.

€62.40 TTC
(52,00 € HT)

Copper gasket 16 x 21

Copper gasket 16 x 21 1.5mm thick

€1.80 TTC
(1,50 € HT)

Brake reservoir with nipple + contact

Brake fluid reservoir, translucent plastic.With plug, fixing bracket and electrical contact for minimum liquid level