Water pump repair kit with aluminum impeller - Ford Vedette
Repair kit for water pump for "Y" or "T" pump body - years 1949-54. New axle is 16mm instead of 12 mm. So you need to drill body 16.5 mm. We recommend correcting the seat of the rotating joint at the back of the body.
€151.20 TTC
(151,20 € HT)
(151,20 € HT)
Cap for heating outlet ø 16 mm
Rubber plug for heating outlet on water pump or radiator. Delivered in ø 16mm by default (also available in 14 or 18 mm, just specify when ordering)
€4.80 TTC
(4,00 € HT)
(4,00 € HT)
Heating valve with lever Ø 11,8 mm
Heating valve with lever Ø 11,8 mm. Synthetic material (no corrosion problem). Length connection end to other: 84 mm
€25.00 TTC
(20,83 € HT)
(20,83 € HT)
Low hose for Ford Vedette
Low hose for Ford Vedette. (2 hoses per vehicle). Delivered individually. Add a stainless steel T if leaving to the heating radiator (available in the shop). Depending on the radiator model, length to be cut.
€25.20 TTC
(21,00 € HT)
(21,00 € HT)
Stainless heating steel T hose for Ford Vedette
Stainless steel T allowing the heating return to be connected to the lower main radiator hose. Ford Vedette, Vendôme or other vehicle using this system.
€30.00 TTC
(30,00 € HT)
(30,00 € HT)
Cap for heating flow diameter 8 mm
Rubber stopper for starting on water pump - 8 mm
€2.50 TTC
(2,08 € HT)
(2,08 € HT)
Temperature manometer with probe - black background
Mano "OS" temperature indicator (without electrical connection). Direct reading by probe mounted on a radiator hose (high outlet). 52 mm recess on the pressure gauge side.Capillary 1m80. Delivered with lighting and probe for the hose.
€78.00 TTC
(65,00 € HT)
(65,00 € HT)
Ford Vedette dynamo-fan belt
Secondary propeller-dynamo belt for Ford Vedette
€18.00 TTC
(15,00 € HT)
(15,00 € HT)
Ford Vedette Simca V8 Calorstat Thermostat
" Thermostat for cooling circuit. For V8 Vedette Ford and Simca Versailles, Chambord, Vendôme, Monte Carlo etc. (Two thermostats per V8 engine). Sold individually. "
€24.00 TTC
(20,00 € HT)
(20,00 € HT)
Heating departure 16 mm for hose
Departure to equip a standard hose in the model with departure for heating.Diam. 16 mm
€28.20 TTC
(23,50 € HT)
(23,50 € HT)
Ford Vedette water pump belt
Main belt connecting water pumps-crankshaft-fan
€24.00 TTC
(20,00 € HT)
(20,00 € HT)
Heating valve with lever Ø 16 mm
Heating valve with lever Ø 16 mm. Synthetic material (no corrosion problem). Length connection end to other: 113.5 mm
€31.20 TTC
(26,00 € HT)
(26,00 € HT)
Aluminum water departure on engine block - Ford star
Aluminum water supply on engine block to radiator - Ford Vedette 1949 to 1954 and Comète 13 hpCareful French manufacturing - machined and welded aluminum.Two parts are needed per engine. Sold individually.
€91.80 TTC
(91,80 € HT)
(91,80 € HT)
Temperature manometer with probe - ivory background
Mano "OS" temperature indicator (without electrical connection). Direct reading by probe mounted on a radiator hose (high outlet). 52 mm recess on the pressure gauge side.Capillary 1m80. Delivered with lighting and probe for the hose.
€78.00 TTC
(65,00 € HT)
(65,00 € HT)
Heating valve controlled by cable Ø 16 mm
Heating valve controlled by cable Ø 16 mm. Synthetic material (no corrosion problem)Length connection end to other: 91.5 mm
€58.80 TTC
(49,00 € HT)
(49,00 € HT)
