Copper pipe fitting 7/16 - ext thread 11mm
Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm
€6.36 TTC
(5,30 € HT)
(5,30 € HT)
7/16 banjo fitting + 7/16 hollow screw + seals
7/16 banjo fitting + 7/16 hollow screw + sealsDiameter male thread of the screw 11 mm
€32.82 TTC
(27,35 € HT)
(27,35 € HT)
Master cylinder from dec 59 to dec 63 - Simca Aronde P60
Complete master cylinder. Diameter 25.4 mm. Assembly from dec 59 to dec 63e:- P60, Montlhéry, Etoile 6 and 7cv, Elysée, from December 1959 to December 1963,
€148.80 TTC
(124,00 € HT)
(124,00 € HT)
Special brake grease tube - Plastilub ATE - 75 ml
Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!
€13.80 TTC
(11,50 € HT)
(11,50 € HT)
Brake hose 378 mm before Simca 9 Jan 53 at the end
Front brake hose. Simca 9 1200 assembly from January 53 to end. Length 378 mm
€32.40 TTC
(27,00 € HT)
(27,00 € HT)
Metal insert tip for jar
Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.
€10.80 TTC
(9,00 € HT)
(9,00 € HT)
Front brake cylinders x 2 - cone protruding 28.5mm - Simca Aronde Jan 53 to Nov 57
Pair of front wheel cylinders L and R - d 28.57 mm. 3/8 inlet - protruding cone - Left mounting. Length 72 mm - inside liquid passage = 8.5 mm. Assembly:- Simca 9 1200 from 53 to end of series,- Simca Aronde from Jan 53 to Nov 57.
€128.40 TTC
(107,00 € HT)
(107,00 € HT)
Front and rear brake hose 470 mm - Simca 9 - Debut a 01/53
Front and rear brake hose - 470 mm - Made in France - Simca 9 - 1200 until January 1953
€30.00 TTC
(25,00 € HT)
(25,00 € HT)
Master cylinder - Nov 57 to 06/62 - Simca utility 500kg
Complete master cylinder. Diameter 25.4 mm.Dovetail BreakUtility 500 kgNov. 57 => May 62P60 500 kgDec. 1959 => End of seriesRanch 1960
€148.80 TTC
(124,00 € HT)
(124,00 € HT)
Adapter connection 7/16 male - 1/2 female
Adaptateur freinage mâle 7/16 (envion 11mm)femelle 11/16 pour recevoir gros flexible (17mm mâle
€18.00 TTC
(15,00 € HT)
(15,00 € HT)
Set of 4 front brake shoes Simca Aronde P60 (standard exchange)
Set of 4 relined front brake shoes, in standard exchange for Simca 9 - Aronde - P60 - any model (non-contractual photo). High performance friction, excellent grip, applied by industrial bonding, elimination of rivets which damage the drums. ...
€120.00 TTC
(100,00 € HT)
(100,00 € HT)
Front brake cylinders x 2 - cone protruding 28.5mm- Simca Aronde 500 kg - start at 11/57
Pair of front wheel cylinders L and R - d 28.57 mm. 3/8 inlet - protruding cone - Left mounting. Length 72 mm - inside liquid passage = 8.5 mm. Assembly:- Simca utility 500 kg from start to 11/57
€128.40 TTC
(107,00 € HT)
(107,00 € HT)
Rear brake cylinder 22mm - Simca Aronde - Nov 57 to Dec 59
Rear brake cylinder. D 22 mm - 3/8 inlet. Editing: - Simca Aronde November 56 to December 59
€66.00 TTC
(55,00 € HT)
(55,00 € HT)
Adapter connection 7/16 UNF female - 1/2 UNF male
Adapter connection 1/2 UNF male - 7/16 UNF female
€12.06 TTC
(10,05 € HT)
(10,05 € HT)
(Master cylinder)