Pipe Ø 8 mm from reservoir to master cylinder - 1 m
Brake line remanufactured upon request, exclusively in 8 mm diameter copper.Photo not contractually binding. Supplied WITHOUT fittings - you can order the one you need from our store (for the master cylinder side). The other end is bare (inlet on ...
€50.40 TTC
(42,00 € HT)
(42,00 € HT)
Master cylinder from dec 59 to dec 63 - Simca Aronde P60
Complete master cylinder. Diameter 25.4 mm. Assembly from dec 59 to dec 63e:- P60, Montlhéry, Etoile 6 and 7cv, Elysée, from December 1959 to December 1963,
€148.80 TTC
(124,00 € HT)
(124,00 € HT)
Front or rear brake cylinder 25.4mm - Simca Aronde until Sept 51
Front and rear wheel cylinder d 25.4mm - Simca 9 Aronde up to seven 51
€52.20 TTC
(43,50 € HT)
(43,50 € HT)
Brake pipe - from 300 to 350 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
€90.84 TTC
(75,70 € HT)
(75,70 € HT)
Special brake grease tube - Plastilub ATE - 75 ml
Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!
€13.80 TTC
(11,50 € HT)
(11,50 € HT)
Front brake cylinders x 2 - cone protruding 28.5mm- Simca Aronde 500 kg - start at 11/57
Pair of front wheel cylinders L and R - d 28.57 mm. 3/8 inlet - protruding cone - Left mounting. Length 72 mm - inside liquid passage = 8.5 mm. Assembly:- Simca utility 500 kg from start to 11/57
€128.40 TTC
(107,00 € HT)
(107,00 € HT)
Brake hose 493 mm AR - Simca 9 and Aronde - 01/53 to 02/56
Rear brake hose 493 mm - Simca 9 - 1200 cm3 and Aronde - 01/153 to 02/1956
€32.40 TTC
(27,00 € HT)
(27,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
€11.40 TTC
(9,50 € HT)
(9,50 € HT)
Pipe connection 1/2 20 UNF - 8 mm tube - special jar - 12.5 mm thread ext.
Rigid brake line nut. 1 / 2-20 UNF i.e. Ø 12.5 mm - drilling for 8 mm tube special brake reservoir
€6.18 TTC
(5,15 € HT)
(5,15 € HT)
Adapter fitting 7/16 Male - 7/16 female outgoing cone
Adapter fitting 7/16 Male - 7/16 female outgoing cone
€19.56 TTC
(16,30 € HT)
(16,30 € HT)
1/2 female 20 UNF connection on 8 mm tube (metal brake jar)
Metal tank foot nut (female 1/2 and d 8mm)
€11.10 TTC
(9,25 € HT)
(9,25 € HT)
Copper pipe fitting 7/16 - ext thread 11mm
Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm
€6.36 TTC
(5,30 € HT)
(5,30 € HT)
Front or rear brake hose 367 mm Simca Aronde nov 57 to dec 59
Front or rear brake hose 367 mm long. Male ext 9mm - female int Ø 8.3 mm.Simca Aronde assembly from Nov 57 to Dec 59.
€26.40 TTC
(22,00 € HT)
(22,00 € HT)
Brake line - from 51 to 99 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Large model, length from 50 cm, max 2m. Provide model (length and 2 original tips)Shipping after receiving your model.
€54.84 TTC
(45,70 € HT)
(45,70 € HT)
Brake hose 367 mm - front or rear - Simca Aronde P60
Front or rear brake hose 367 mm long.Male ext 9mm - female int Ø 8.3 mmMounts on Simca Aronde or P60 from Nov 1957 to Dec 1963.Check with your model before ordering.
€26.40 TTC
(22,00 € HT)
(22,00 € HT)
