Rear brake hose 650 mm Renault Galion
Rear brake hose. Length 650 mm. External thread (metal color on the photo) = 10.9 mm - Internal seam (yellow color on the photo) = 11.3 mm.Remember to replace the copper seal on the male thread sideFor other models, please call us
€32.40 TTC
(27,00 € HT)
(27,00 € HT)
Brake reservoir with rubber
Translucent tank, delivered with bracket; rubber plug and fitting.
€38.40 TTC
(32,00 € HT)
(32,00 € HT)
Brake cylinder 1 3/8 U - 34.9 mm - Renault Galion
Front wheel cylinder. Diam 1 "3/8 or 34.9 mm. Fixing by 2 screws type US 5/16 - 24f / p Ø liquid inlet = 1/2 pTo recognize the model it is enough to measure the connection which is screwed in the entry of the cylinder = 12.5 mm.For Renault ...
€97.20 TTC
(81,00 € HT)
(81,00 € HT)
Brake reservoir with nipple + contact
Brake fluid reservoir, translucent plastic.With plug, fixing bracket and electrical contact for minimum liquid level
€48.00 TTC
(40,00 € HT)
(40,00 € HT)
Hydrovac brake assist Renault Galion
Reconditioned vacuum brake assist (hydrovac). Renault assembly or similar vehicle. Complete disassembly, micro balling, replacement of wearing parts, tests. Lacquering. Neat work. The refurbished part is sent after receipt of the used mechanism, ...
€1,595.00 TTC
(1 329,17 € HT)
(1 329,17 € HT)
Special brake grease tube - Plastilub ATE - 75 ml
Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!
€13.80 TTC
(11,50 € HT)
(11,50 € HT)
Adapter connection 7/16 male - 11/16 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 11/16 pour recevoir gros flexible (17mm mâle
€38.64 TTC
(32,20 € HT)
(32,20 € HT)
Copper pipe fitting 7/16 - ext thread 11mm
Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm
€6.36 TTC
(5,30 € HT)
(5,30 € HT)
Brake line - from 100 to 150 cm
" Brake line remanufactured on request, only in copper diameter 6.35 mm. . Provide model (length and 2 original end caps) Shipment after receipt of your model. "
€62.04 TTC
(51,70 € HT)
(51,70 € HT)
Renault Galion master cylinder plug kit, 1400 kg
For Renault Galion, 1400 kg and other heavy goods vehicle derivatives.Kit of 3 caps + 3 copper gaskets for master cylinder.Depending on the model, order the set of 3 plugs + gaskets to close the unnecessary outlets.
€24.31 TTC
(20,26 € HT)
(20,26 € HT)
Brake line - from 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 6.35 mm. Small model, length less than 50 cm. Provide model (length and 2 original tips) Shipping after receipt of your model.
€47.64 TTC
(39,70 € HT)
(39,70 € HT)
Master cylinder Renault Galion, 1400 kg
For Renault Galion, 1400 kg and other heavy goods vehicle derivatives. Complete master cylinder. d 38.1 mm. 3-hole fixing. 3 side outlets and 1 at the end.Depending on the model, order the set of 3 plugs + gaskets to close the unnecessary ...
€204.00 TTC
(170,00 € HT)
(170,00 € HT)
Brake line - from 200 to 250 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
€76.44 TTC
(63,70 € HT)
(63,70 € HT)
Pipe connection 1/2 20 UNF - 8 mm tube - special jar - 12.5 mm thread ext.
Rigid brake line nut. 1 / 2-20 UNF i.e. Ø 12.5 mm - drilling for 8 mm tube special brake reservoir
€6.18 TTC
(5,15 € HT)
(5,15 € HT)
