Special brake grease tube - Plastilub ATE - 75 ml
Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!
€11.50 TTC
(11,50 € HT)
(11,50 € HT)
Brake cylinder 1 3/8 U - 34.9 mm - Renault Galion
Front wheel cylinder. Diam 1 "3/8 or 34.9 mm. Fixing by 2 screws type US 5/16 - 24f / p Ø liquid inlet = 1/2 pTo recognize the model it is enough to measure the connection which is screwed in the entry of the cylinder = 12.5 mm.For Renault ...
€78.50 TTC
(78,50 € HT)
(78,50 € HT)
Brake line - from 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 6.35 mm. Small model, length less than 50 cm. Provide model (length and 2 original tips) Shipping after receipt of your model.
€39.70 TTC
(39,70 € HT)
(39,70 € HT)
Brake cylinder 1 3/8 F - 34.9 mm - Renault Galion
For Renault Galion, 1400 kg and other heavy goods vehicle derivatives. Wheel cylinder. Diam 1 "3/8 or 34.9 mm.Front wheel cylinder. Diam 1 "3/8 or 34.9 mm. Fixing by 2 screws type M8 - Ø liquid inlet = 7/16 pTo recognize the model, it suffices to ...
€78.72 TTC
(78,72 € HT)
(78,72 € HT)
Pipe connection 1/2 20 UNF - 8 mm tube - special jar - 12.5 mm thread ext.
Rigid brake line nut. 1 / 2-20 UNF i.e. Ø 12.5 mm - drilling for 8 mm tube special brake reservoir
€5.15 TTC
(5,15 € HT)
(5,15 € HT)
Tailor-made front or rear brake hose
Tailor-made flexible front or rear fein. A simple call will allow us to determine your type of hose and its length.Same price as a standard model. Citroen HY, type H, HZ, HW.Non contractual image.
€29.50 TTC
(29,50 € HT)
(29,50 € HT)
Rear brake hose 650 mm Renault Galion
Rear brake hose. Length 650 mm. External thread (metal color on the photo) = 10.9 mm - Internal seam (yellow color on the photo) = 11.3 mm.Remember to replace the copper seal on the male thread sideFor other models, please call us
€26.00 TTC
(26,00 € HT)
(26,00 € HT)
Brake pipe - from 250 to 300 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
€69.70 TTC
(69,70 € HT)
(69,70 € HT)
Front brake hose 450 mm - Renault Galion
Front brake hose - Length 450 mm - 2 threaded ends d 17 mm.
€25.00 TTC
(25,00 € HT)
(25,00 € HT)
Adapter connection 7/16 male - 1/2 female
Adaptateur freinage mâle 7/16 (envion 11mm)femelle 11/16 pour recevoir gros flexible (17mm mâle
€15.00 TTC
(15,00 € HT)
(15,00 € HT)
Metal insert tip for jar
Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.
€8.85 TTC
(8,85 € HT)
(8,85 € HT)
Canalisation Ø 8 mm bocal vers maitre cylindre - 1 m
Canalisation de frein refabriquée à la demande, uniquement en cuivre diamètre 8 mm
€42.00 TTC
(42,00 € HT)
(42,00 € HT)
Brake line - from 200 to 250 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
€63.70 TTC
(63,70 € HT)
(63,70 € HT)
Copper pipe fitting 7/16 - ext thread 11mm
Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm
€5.20 TTC
(5,20 € HT)
(5,20 € HT)
