Front brake cylinder 34.9 mm - 12.5 mm or 1/2" inlet - Renault Goelette - 2nd generation
Front wheel cylinder. Diam 1 "3/8 or 34.9 mm. Fixing by 2 screws type US 5/16 - 24f / p Ø liquid inlet = 1/2 pTo recognize the model it is enough to measure the connection which is screwed in the entry of the cylinder = 12.5 mm.For Renault ...
(82,00 € HT)

Renault Galion master cylinder plug kit, 1400 kg
For Renault Galion, 1400 kg and other heavy goods vehicle derivatives.Kit of 3 caps + 3 copper gaskets for master cylinder.Depending on the model, order the set of 3 plugs + gaskets to close the unnecessary outlets.
(20,26 € HT)

Special brake grease tube - Plastilub ATE - 75 ml
Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!
(11,50 € HT)
Front brake hose 450 mm - Renault Galion
Front brake hose - Length 450 mm - 2 threaded ends d 17 mm.
(25,00 € HT)
Adapter fitting 3/8 UNF Male - 10x100 female
Adapter fitting 3/8 UNF Male - 10x100 female
(17,50 € HT)
Front brake cylinder kit 34.9mm - Renault Galion 1400 kg
Repair kit for AV cylinder. d 34.93 mm
(15,00 € HT)
Brake reservoir with rubber
Translucent tank, delivered with bracket; rubber plug and fitting.
(32,00 € HT)
Brake pipe - from 300 to 350 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
(75,70 € HT)
Tailor-made front or rear brake hose
Tailor-made flexible front or rear fein. A simple call will allow us to determine your type of hose and its length.Same price as a standard model. Citroen HY, type H, HZ, HW.Non contractual image.
(29,50 € HT)
copper gasket kit for front brake cylinder (assembly with hollow screw 7/16) - Renault R2087 Goélette Prairie
Set of 2 seals for hollow screw and banjo (for 1 cylinder)
(3,40 € HT)

Adapter connection 1/2 UNF female - 3/8 UNF male
Braking adapter 1 / 2-20 UNF female by 3/8 24 male threads
(9,90 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,50 € HT)
Brake line - from 150 to 200 cm
Brake line re-manufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original end pieces)Shipping after receiving your model.
(57,70 € HT)
Adapter connection 7/16 male - 11/16 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 11/16 pour recevoir gros flexible (17mm mâle
(32,50 € HT)