(33,29 € HT)
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Battery switch with key - security
(7,08 € HT)
Mano "OS" Tachometer 0 to 5000 rpm for 4-cylinder petrol engine. Connects to the "break" terminal on the ignition coil. 52 mm recess on the pressure gauge side. delivered with lighting. for negative to ground
(58,29 € HT)
For greasing bearings - Water resistant
(6,67 € HT)
Ignition coil guaranteed for use with a 12 V platinum screw igniter (breakers). Impedance respected to prevent the breakers from bluing.Works perfectly also with electronic module or integral electronic igniter. (Non contractual photo)
(39,00 € HT)
Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 57.50. Be careful in case of error on your part, these products cannot be taken back.Please note that fitting current rings may require modifying the depth of ...
(199,17 € HT)
Cylinder head gasket for LR2, LR4, LR4N2 and derivatives.
(82,78 € HT)
Sealing paste to be applied on both sides of a cylinder head gasket. Product similar to "Collex". Leave to evaporate for about 30 min at room temperature after application, then fit the gasket - improves the seal - recommended with solid copper ...
(24,96 € HT)
Mano "OS" temperature indicator (without electrical connection). Direct reading by probe mounted on a radiator hose (high outlet). 52 mm recess on the pressure gauge side.Capillary 1m80. Delivered with lighting and probe for the hose.
(75,17 € HT)
Paper fuel filter for 6 or 8 mm hose.
(6,00 € HT)
Bearing for Rosengart dynamo size 17x42x11Non contractual photo
(78,91 € HT)
" Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 and derivatives. Bore 57.50 - 2 x compression h 2mm - 2 x scraper h 3.5 mm Contact us for other dimensions. "
(199,17 € HT)
Bosch, NGK or Béru High Performance type ignition coil, guaranteed for use with:- 6 V platinum-plated screw igniter (breakers),- electronic ignition type 123 ignition,- platinum screw igniter + electronic amplification module
(66,50 € HT)
Regulator for Rosengart 3 brush dynamo.Attaches to the body of the dynamo - 6V
(74,95 € HT)
Set of 4 pistons for Rosengart LR2, LR4, LR4N2, and derivatives. Current manufacture - Bore 56.00 - 56.50 - 57.00 - 57.50 - 58.00 mm For 12 mm or 16 mm axle (to be specified when ordering). Supplied with axles, segments, circlips. Possibility of ...
(865,00 € HT)