
Battery switch - safety
Battery isolator - used to electrically isolate the battery. To be placed on a terminal of the battery.
(10,00 € HT)
Pressure hose for igniter Ø 5.5 mm - by the meter
Hose to connect the igniter / carburetor depression 5.5 mm sold by the meter.
(8,50 € HT)
Exhaust manifold paint - 250 ml
(40,00 € HT)

Ignition coil 12v VALEO
Ignition coil guaranteed for use with a 12 V platinum screw igniter (breakers). Impedance respected to prevent the breakers from bluing.Works perfectly also with electronic module or integral electronic igniter. (Non contractual photo)
(50,00 € HT)
Segment set Ø 56.50 2x2x3 - Rosengart LR (set of 12) - Need to adjust gap before to use
You need to adjust gap before to place in each cylinder Set of 12 rings - fit to LR2, LR4, LR4N2 engine Ø 56.50 (somme are 57 mm) - 8 x compression hauteur 2mm - 4 x racleur hauteur 3 mm Attention certains segments sont livrés en Ø 57 mm . ...
(98,00 € HT)
IGOL Rallye Gear axle transmission oil SAE 75 80 90 - GL4
Oil for gearbox and bridge for old mechanics. Type SAE 75 80 90 - GL4. 1L container.(Not suitable for Peugeot type screw axles)
(15,00 € HT)
Rosengart dynamo bearing 17x39x9
Bearing for Rosengart dynamo size 17x39x9 type 99203Non contractual photo
(51,45 € HT)
Calibrouge (Plastigage) mechanical clearance measurement
"Plastigage"The Calibrouge ("plastigage or plastigauge") is a simple and practical tool for measuring the clearances of your bearings. Range of use: operating clearance from 0.025 to 0.175 mm
(22,50 € HT)
Manometer Tachometer - 2 - 4 - 6 - 8 cyl - electric 12V - black background - for negative to mass
Mano "OS" Tachometer 0 to 5000 rpm for 4-cylinder petrol engine. Connects to the "break" terminal on the ignition coil. 52 mm recess on the pressure gauge side. delivered with lighting. for negative to ground
(58,29 € HT)
Ignition 4 x spark plugs 14mm base Rosengart
Set of 4 NGK std base spark plugs (14 mm), for cylinder head. Specially adapted to pre-war.
(20,00 € HT)
Aviation collex type paste gasket for cylinder head - 450ml
Sealing paste to be applied on both sides of a cylinder head gasket. Product similar to "Collex". Leave to evaporate for about 30 min at room temperature after application, then fit the gasket - improves the seal - recommended with solid copper ...
(35,00 € HT)
Spark plug ignition with 18 mm base
NGK big base spark plug (18 mm), for cylinder head. Specially adapted to pre-war. Sold individually
(9,00 € HT)
Support de manomètre
Support métalique, laqué noir pour manomètre standard D52 mm. Prêt à fixé.
(7,94 € HT)
Gasket paste for motor - auto extrudable cartridge 200 ml
Mot. Silicone gasket & self-extruding housing RTV K164 high-quality, heat-resistant silicone base: modified oxime silicone (acid-free hardening system)
(35,00 € HT)
Charger and maintenance 6v / 12v Accumate
AccuMate is designed to automatically charge and monitor batteries without the danger of overcharging them, regardless of plug-in time. AccuMate is available for all 6V and 12V lead acid batteries, making it a perfect accessory for owners of ...
(86,25 € HT)
Rosengart dynamo bearing 17x42x11
Bearing for Rosengart dynamo size 17x42x11Non contractual photo
(78,91 € HT)
Viewed products
valve x 4 - Ø29x8x107 - Simca Aronde Ariane exhaust Flash engine
valve x set of 4 - Ø 29 x 8 x 107 - exhaust - Simca Aronde P60 Ariane Flash engine
(156,25 € HT)
connecting rod bearing STD - Ø 40.00 - Simca 9 - 1200 cm3
connecting rod bearing STD - Ø 40.00 - Simca 9 - 1200 cm3(does not mount on Flash or Rush)
(195,83 € HT)