Ignition 4 x spark plugs 14mm base Rosengart
Set of 4 NGK std base spark plugs (14 mm), for cylinder head. Specially adapted to pre-war.
€20.83 TTC
(20,83 € HT)
(20,83 € HT)
Reinforced collar for exhaust - Ø 64-67 mm
Reinforced collar for exhaust - Ø 64-67 mmRobust French manufacturing
€6.50 TTC
(6,50 € HT)
(6,50 € HT)
Calibrouge (Plastigage) mechanical clearance measurement
"Plastigage"The Calibrouge ("plastigage or plastigauge") is a simple and practical tool for measuring the clearances of your bearings. Range of use: operating clearance from 0.025 to 0.175 mm
€22.50 TTC
(22,50 € HT)
(22,50 € HT)
Segment set Ø 56.50 2x2x2x4 - Rosengart LR (set of 16)
Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 56.50- 3 x high compression 2mm- 1 x high scraper 4 mmContact us for other dimensions.
€199.17 TTC
(199,17 € HT)
(199,17 € HT)
copy of Segment set Ø 56.50 2x2x2x4 - Rosengart LR (set of 16)
Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 56.50- 3 x high compression 2mm- 1 x high scraper 4 mmContact us for other dimensions.
€125.00 TTC
(125,00 € HT)
(125,00 € HT)
Dark green engine paint RAL 6005 - 500 ml
Dark green engine paint RAL 6005 -Pot of 500 mlSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated ...
€24.92 TTC
(24,92 € HT)
(24,92 € HT)
- New
Set Segments Ø 58.00 2x2x3x3 - Rosengart LR (set of 16)
Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 58. Attention in case of error on your part, these products cannot be taken back.- 8 x compression h 2mm- 8 x scraper h 3 mmContact us for other sizes.
€199.17 TTC
(199,17 € HT)
(199,17 € HT)
Segments set Ø 56.00 2.5x2x2.5x4 - Rosengart LR (set of 16)
Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 56.00Contact us for other dimensions.
€199.17 TTC
(199,17 € HT)
(199,17 € HT)
Rosengart crankshaft rear bearing
Roller bearing, rear crankshaft bearing assembly (flywheel side) for LR2, LR4, LR4N2 engines and derivatives.
€78.65 TTC
(78,65 € HT)
(78,65 € HT)
Rosengart LR segmentation (12p)
Set of segments for LR2, LR4, LR4N2 engines and derivatives. Bore available from 56 to 58 mm. Version with 3 segments per piston (2 sealed and 1 oil scraper) Contact us to define the height of each segment. Possibility of ordering a set ...
€148.00 TTC
(148,00 € HT)
(148,00 € HT)
- New
Set Segments Ø 57.00 2x2x2x4 - Rosengart LR (set of 16)
Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 57.50. Be careful in case of error on your part, these products cannot be taken back.Please note that fitting current rings may require modifying the depth of ...
€199.17 TTC
(199,17 € HT)
(199,17 € HT)
Exhaust support strap reinforces 90 mm
Suspension strap for exhaust. Robust construction, reinforced rubber, metal eyelets.92 mm center distance for M8 mm screws.
€13.42 TTC
(13,42 € HT)
(13,42 € HT)
IGOL 20W50 mineral oil - 5L can
5 l can (non contractual photo) - Viscosity: 20W-50BenefitsHéRITAGE GTZ mineral oil.Multigrade lubricant for Gasoline and Diesel engines, made from severely refined mineral bases and additives suitable for older engines. The anti-wear additive ...
€32.00 TTC
(32,00 € HT)
(32,00 € HT)
Aerosol gasket for cylinder head
Sealing spray varnish to be sprayed on both sides of a cylinder head gasket. Improves sealing, essential with solid copper gaskets (any thickness)
€35.00 TTC
(35,00 € HT)
(35,00 € HT)
Aviation collex type paste gasket for cylinder head
Sealing paste to be applied on both sides of a cylinder head gasket. Product similar to "Collex". Leave to evaporate for about 30 min at room temperature after application, then fit the gasket - improves the seal - recommended with solid copper ...
€24.96 TTC
(24,96 € HT)
(24,96 € HT)
