Special brake grease tube - 5g
Tube of special braking grease (5gr), Lockheed DOT and silicone compatible, protects steel cylinder and piston parts, helps them slide, compatible with rubber parts.
€4.67 TTC
(3,89 € HT)
(3,89 € HT)
Master cylinder 25.4 mm Panhard Dyna X 86 - April 1950 and +
Master cylinder 25.4 mm Panhard Dyna - April 1950 and +Piston 1 inch or 25.4 mm1/2 output 20 f per inchEntry about 17 mm60 mm center distance for M 8 screws
€64.80 TTC
(54,00 € HT)
(54,00 € HT)
Adapter connection 7/16 male - 3/8 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 3/8
€22.80 TTC
(19,00 € HT)
(19,00 € HT)
Male thread brake reservoir
Brake fluid reservoir. Supplied with bracket, plug and 3/4 male connector 16 threads / p. External thread diameter = 18.5 mm. Delivered without caliper (fixing by the thread on the master cylinder). Lockeed and silicone compatible
€42.00 TTC
(35,00 € HT)
(35,00 € HT)
Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone
Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone
€18.00 TTC
(15,00 € HT)
(15,00 € HT)
Adapter fitting 7/16 Male - 7/16 female outgoing cone
Adapter fitting 7/16 Male - 7/16 female outgoing cone
€19.56 TTC
(16,30 € HT)
(16,30 € HT)
Copper pipe fitting 7/16 - ext thread 11mm
Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm
€6.36 TTC
(5,30 € HT)
(5,30 € HT)
Rear brake cylinder 22 mm - Panhard Dyna X 86 - light truck
Rear brake cylinder 19 mm - Panhard Dyna X 86 - 04/1950 to end
€87.36 TTC
(72,80 € HT)
(72,80 € HT)
Brake line - from 100 to 150 cm
" Brake line remanufactured on request, only in copper diameter 6.35 mm. . Provide model (length and 2 original end caps) Shipment after receipt of your model. "
€62.04 TTC
(51,70 € HT)
(51,70 € HT)
Brake line - from 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 6.35 mm. Small model, length less than 50 cm. Provide model (length and 2 original tips) Shipping after receipt of your model.
€47.64 TTC
(39,70 € HT)
(39,70 € HT)
Set of 4 relined REAR brake shoes - Panhard
Set of 4 relined brake shoes (front or rear) 195 mm x 30 mm in standard exchange for Panhard Dyna X86, Dyna Z, PL 17 and series 24Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could ...
€117.60 TTC
(98,00 € HT)
(98,00 € HT)
Front brake cylinder 25.4 mm - Panhard Dyna - April 1950 and +
Front L and R brake cylinder Panhard Dyna - April 1950 and +. D 1 "(25.4 mm).Sold individually (1 cylinder per wheel)
€52.20 TTC
(43,50 € HT)
(43,50 € HT)
