Inclined banjo + hollow screw + 2 joints for connection on Simca 6 cylinder

Inclined banjo with 17mm inlet (11 / 16th) + 7 / 16th hollow screw + 2 seals for Simca 6 cylinder liquid inlet connection

€33.36 TTC
(27,80 € HT)

Brake line - from 200 to 250 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.

Copper seal 10.2 x 13.5

Copper gasket 10.2 x 13.5 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Male thread brake reservoir

Brake fluid reservoir. Supplied with bracket, plug and 3/4 male connector 16 threads / p. External thread diameter = 18.5 mm. Delivered without caliper (fixing by the thread on the master cylinder). Lockeed and silicone compatible

Rear brake cylinder 22 mm - Panhard Dyna X 86 - light truck

Rear brake cylinder 19 mm - Panhard Dyna X 86 - 04/1950 to end

€87.36 TTC
(72,80 € HT)

Copper pipe fitting 7/16 - ext thread 11mm

Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm

Copper gasket 19 x 24

Copper gasket 24x19 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

1/2 female 20 UNF connection on 8 mm tube (metal brake jar)

Metal tank foot nut (female 1/2 and d 8mm)

Copper gasket 13.5x20.5

Copper gasket 13.50 x 20.50 th 1mm

€1.85 TTC
(1,54 € HT)

Copper gasket 10.5 x 20

Copper gasket 10.5 x 20 thickness 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 15.3 x 21

Copper gasket 15.30 x 21.00 th 1mm

€1.80 TTC
(1,50 € HT)

Ecrou

Adapter fitting 7/16 Male - 7/16 female outgoing cone

Adapter fitting 7/16 Male - 7/16 female outgoing cone

Special brake grease tube - 5g

Tube of special braking grease (5gr), Lockheed DOT and silicone compatible, protects steel cylinder and piston parts, helps them slide, compatible with rubber parts.

Front brake cylinder 25.4 mm - Panhard Dyna - April 1950 and +

Front L and R brake cylinder Panhard Dyna - April 1950 and +. D 1 "(25.4 mm).Sold individually (1 cylinder per wheel)

€52.20 TTC
(43,50 € HT)

Brake line - from 0 to 50 cm

Brake line remanufactured on demand only in copper diameter 6.35 mm. Small model, length less than 50 cm. Provide model (length and 2 original tips) Shipping after receipt of your model.