fuel filter ø 6 and 8 mm

Paper fuel filter for 6 or 8 mm hose.

Cable passage vitesses pour SImca Aronde P60 à partir de 06/1960

Reinforced collar for exhaust - Ø 52-55 mm

Reinforced collar for exhaust - Ø 52.55 mmRobust French manufacturing

Serflex collar for gasoline hose diam 8 mm

serflex collar 10-16 mm

IGOL 20W50 mineral oil - 5L can

5 l can (non contractual photo) - Viscosity: 20W-50BenefitsHéRITAGE GTZ mineral oil.Multigrade lubricant for Gasoline and Diesel engines, made from severely refined mineral bases and additives suitable for older engines. The anti-wear additive ...

gasket for solex 32 pbic carburetor

2 x paper gaskets for Solex 32 pbi carburetor base.Fixing center distance: 60 mmCentral passage: 32 mmTotal length: 78 mmwidth: 50mm

Pressure hose for igniter Ø 5.5 mm - by the meter

Hose to connect the igniter / carburetor depression 5.5 mm sold by the meter.

Gasket for Simca Aronde P60 Rush engine oil purifier

O-ring for oil purifier mounted on Rush Simca engine.

Support de manomètre

Support métalique, laqué noir pour manomètre standard D52 mm. Prêt à fixé.

Segment set Ø 74 mm Simca 2.5x2.5x2.5x4 - 4cyl

Segment set Ø 74 mm Simca 2.5x2.5x2.5x4 - 4cyl

Clutch disc 188mm - Simca 8 - 9 Aronde P60 Standard Exchange

Clutch disc reconditioned, in standard exchange. Complete disassembly, micro-blasting and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, non-contractual photo)

€132.00 TTC
(110,00 € HT)

Battery switch - safety

Battery isolator - used to electrically isolate the battery. To be placed on a terminal of the battery.

Complete pistons - set of 4 - Ø 72.00 mm - Simca

set of 4 pistons Ø 72 mm - Simca.

Gearbox or axle oil SAE 80-140 - IGOL - 1L

Viscosity index 80 - 140API GL-4(Not suitable for Peugeot type screw axles)

Segment set Ø 74 mm Simca 2x2x5 - 4cyl

Segment set Ø 74 mm Simca 2x2x5 - 4cyl

Aviation collex type paste gasket for cylinder head - 117ml

Sealing paste to be applied on both sides of a cylinder head gasket. Product similar to "Collex". Leave to evaporate for about 30 min at room temperature after application, then fit the gasket - improves the seal - recommended with solid copper ...