- New
Calibrouge (Plastigage) mechanical clearance measurement
"Plastigage"The Calibrouge ("plastigage or plastigauge") is a simple and practical tool for measuring the clearances of your bearings. Range of use: operating clearance from 0.025 to 0.175 mm
€27.00 TTC
(22,50 € HT)
(22,50 € HT)
connecting rod bearing STD - Ø 40.00 - Simca 9 - 1200 cm3
connecting rod bearing STD - Ø 40.00 - Simca 9 - 1200 cm3(does not mount on Flash or Rush)
€235.00 TTC
(195,83 € HT)
(195,83 € HT)
Kit: spinnaker ring timing dimension for RUSH engine - Simca Aronde P60 Ariane
Sealed spinnaker ring on the distribution side to complete the Simca RUSH engine gaskets kit: dimension 52 x 69Engine types 306 (6hp) 301 - (7hp) 301 S (7hp)Displacement 1,089 cm3 1,290 cm3Bore (mm) 68 74Stroke (mm) 75 75
€12.49 TTC
(10,41 € HT)
(10,41 € HT)
Distribution kit: 2 sprockets + chain - central nut type - Simca 9 - 1200 cm3
Distribution kit: 2 sprockets + chain - central nut type - Simca 9 - 1200 cm3
€372.00 TTC
(310,00 € HT)
(310,00 € HT)
Exhaust suspension ring 63x96 width 27 mm - Peugeot 203
Suspension ring for Peugeot 203 exhaust and othersDimension approximately 63 x 96 x width 27 mm
€11.00 TTC
(11,00 € HT)
(11,00 € HT)
Complete pistons - set of 4 - Ø 72.50 mm - Simca
set of 4 piston Ø 72.50 mm - Simca.
€738.00 TTC
(615,00 € HT)
(615,00 € HT)
side shim set bearing +0.20 mm - Simca Aronde Ariane RUSH 6 and 7 hp engine
side shim set bearing - Simca Aronde Ariane RUSH 6 and 7 hp engineoversized + 0.20 mm
€150.00 TTC
(125,00 € HT)
(125,00 € HT)
Segment clearance Ø 72 mm - 2.5 x 2.5 x 3 x 4 - Simca 9 - Aronde
Set of 16 segments for 4 pistons dimension Ø 72 mm - Simca 9 or Aronde enginecomposition per plunger:4 x fire segment 2.5 mm4 x compression in 2.5 mm4 x compression in 3 mm4 x scraper in 4 mmPossibility to order in 85 mm (call us) - ...
€123.60 TTC
(103,00 € HT)
(103,00 € HT)
Ignition finger igniter Ducellier 65mm
Finger for Ducellier distributor equipped with a 65mm headMounts with Ducellier 65 mm head
€13.50 TTC
(11,25 € HT)
(11,25 € HT)
Pressure hose for igniter Ø 5.5 mm - by the meter
Hose to connect the igniter / carburetor depression 5.5 mm sold by the meter.
€10.20 TTC
(8,50 € HT)
(8,50 € HT)
Aerosol gasket for cylinder head
Sealing spray varnish to be sprayed on both sides of a cylinder head gasket. Improves sealing, essential with solid copper gaskets (any thickness)
€42.00 TTC
(35,00 € HT)
(35,00 € HT)
connecting rod bearing STD - Ø 40 - Simca Aronde RUSH 6cv - 1090 cm3
connecting rod bearing STD - Ø 40 - Simca Aronde RUSH 6cv - 1090 cm3
€228.00 TTC
(190,00 € HT)
(190,00 € HT)
Reinforced collar for exhaust - Ø 44-47 mm
Reinforced collar for exhaust - Ø 44-47 mmRobust French manufacturing
€5.80 TTC
(4,83 € HT)
(4,83 € HT)
Ignition harness silicone Simca 9 dovetail P60
Ignition harness (5 wires) Highly recommended with electronic ignition. Wire with red silicone insulator, works with platinum screws or electronic ignition, current manufacture (not from old stocks).Lengths:27 - 27 - 36 - 45 cm and coil 48 cm
€69.95 TTC
(58,29 € HT)
(58,29 € HT)
Aviation collex type paste gasket for cylinder head - 450ml
Sealing paste to be applied on both sides of a cylinder head gasket. Product similar to "Collex". Leave to evaporate for about 30 min at room temperature after application, then fit the gasket - improves the seal - recommended with solid copper ...
€42.00 TTC
(35,00 € HT)
(35,00 € HT)
