Soles kit for handles and locks - Ford Vedette berline and Vendome
Soles kit for Ford Vedette berline and Vendôme. French manufacture by Techni-Tacot.Including:4 x soft soles for exterior door handles2 x soft soles for exterior door lock
€35.50 TTC
(35,50 € HT)
(35,50 € HT)
Boot handle sole kit - Ford Vedette 1949 -53 - sedan / coupe / cabriolet
Sole for Ford Vedette sedan, coupe, convertible. French manufacture by Techni-Tacot.Including:1 x sole for the trunk handle.
€26.68 TTC
(26,68 € HT)
(26,68 € HT)
Front lights kit 2 x soles - Ford Vedette - 1949 to1952
Sole kit for Ford Vedette - 1949 to 1952. French manufacture by Techni-Tacot.Including:2 x soles for front light plate.
€35.70 TTC
(35,70 € HT)
(35,70 € HT)
Kit 2 x platinum rear light bases - Ford Vendome
Sole kit for Ford VENDOME. Made in France by Techni-Tacot.Including:2 x soles for rear light plate. To be combined with the sole of the upper part (rear lights) on sale here
€35.50 TTC
(35,50 € HT)
(35,50 € HT)
16 other products in the same category:
Front lights kit 2 x soles - Ford Vedette - 1949 to1952
Sole kit for Ford Vedette - 1949 to 1952. French manufacture by Techni-Tacot.Including:2 x soles for front light plate.
€35.70 TTC
(35,70 € HT)
(35,70 € HT)
Boot handle sole kit - Ford Vedette 1949 -53 - sedan / coupe / cabriolet
Sole for Ford Vedette sedan, coupe, convertible. French manufacture by Techni-Tacot.Including:1 x sole for the trunk handle.
€26.68 TTC
(26,68 € HT)
(26,68 € HT)
Seals for deflector x2 Ford Vedette
Set of 2 deflector gaskets for Ford Vedette.Refabrication of original quality
€332.00 TTC
(332,00 € HT)
(332,00 € HT)
2-pin push button - 60 Amp - metal body - starter control
€9.60 TTC
(8,00 € HT)
(8,00 € HT)
Top seal on Ford Vedette apron
Gasket to be glued to the top of the apron and allowing sealing with the cover (close to the windshield), length approximately 1.50m. Dimensions 10x20 mm
€13.50 TTC
(11,25 € HT)
(11,25 € HT)
Gray needle button for Ford Vedette 53 and 54 dashboard
Resin button with Ford Vedette gray lacquered needle, with thread insert, as original.Sold individually. Please note this model with anti-rotation needle screw is intended for Fog and Heating controls (1953 to 54)
€20.92 TTC
(20,92 € HT)
(20,92 € HT)
Seal 4 doors Ford Vedette Comete Vendome
Set of 4 door seals for Ford Vedette, Comète, Vendôme etc.
€105.60 TTC
(88,00 € HT)
(88,00 € HT)
Volant Ford Vendome livré peint teinte au choix - refabrication - échange standard
€634.00 TTC
(634,00 € HT)
(634,00 € HT)
Soundproofing with adhesive 1m2
Sound insulation in heavy plates. Allows you to lower the sound level. Self-adhesive (film to be removed before installation). Plate 200 x 500 mm. The package contains 10 plates, i.e. 1 m2 in total
€87.36 TTC
(72,80 € HT)
(72,80 € HT)
Wiper - Stainless steel squeegee blades 205 mm x 2
Stainless steel wiper blades, squeegee type 20.5 cm . Mounts with the adjustable arms on sale HERE
€15.60 TTC
(13,00 € HT)
(13,00 € HT)
jeu de 3 plots isolants pour cerclo volant Ford Vedette
€9.90 TTC
(8,25 € HT)
(8,25 € HT)
Windscreen wiper - Stainless steel brushes x2 - 220 mm
Stainless steel wiper blades. Length 220 mm. Sold by 2 Mounts with the adjustable arms on sale HERE
€30.60 TTC
(25,50 € HT)
(25,50 € HT)
Arrêt de porte court
€52.40 TTC
(52,40 € HT)
(52,40 € HT)
Viewed products
Gearbox or axle oil SAE 80-140 - IGOL - 1L
Viscosity index 80 - 140API GL-4(Not suitable for Peugeot type screw axles)
€24.00 TTC
(20,00 € HT)
(20,00 € HT)
Boot handle sole kit - Ford Vedette 1954 - Berline / Coupé / Cabriolet
Sole kit for trunk handle Ford Vedette 1954 - Berline / Coupé / Cabriolet - Neat French manufacturing - Techni-Tacot exclusivityUnderstand :1 x rear trunk handle sole
€26.58 TTC
(26,58 € HT)
(26,58 € HT)
Rear brake cylinder -25.4 mm - cone protruding - Peugeot D4 - 04/64 to 05/65
Rear wheel cylinder d 25.4mm, Peugeot D4 D4A D4B - 04/64 to 05/65.Model with cone coming out of the liquid inlet well. Non contractual photo.
€60.60 TTC
(50,50 € HT)
(50,50 € HT)
Seals of the 2 rear doors - Peugeot D3 D4
Seals of the 2 rear doors - Peugeot D3 D4.Product sold in one length. To be cut according to the length of each door.
€117.60 TTC
(98,00 € HT)
(98,00 € HT)
copy of Segment set Ø 66.80 mm Simca Chambord 2.38x2.38x5 - 8cyl
Segment set Ø 66.80 mm Simca 2.38x2.38x5 - 8cyl
€297.60 TTC
(248,00 € HT)
(248,00 € HT)
Pressure hose for igniter Ø 5.5 mm - by the meter
Hose to connect the igniter / carburetor depression 5.5 mm sold by the meter.
€10.20 TTC
(8,50 € HT)
(8,50 € HT)
Front brake hose 493 mm Peugeot D4 - 11/57 to end
Front brake hose length 493 mm for Peugeot D4 D4A D4B - please check the correspondence with your model before ordering.For other models, please call us
€42.00 TTC
(35,00 € HT)
(35,00 € HT)
