Copper gasket 13.1 x 18

Copper gasket 13.1 x 18 mm thickness 1mm

€1.92 TTC
(1,60 € HT)

Special brake grease tube - Plastilub ATE - 75 ml

Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!

Rear brake cylinder 19mm - 3/8 Panhard 24 - 07/1964 to end

Rear wheel cylinder 19mm  - Panhard 24 équipé frein à tambours - 07/1964 à fin de série

€69.12 TTC
(57,60 € HT)

Copper gasket 19 x 24

Copper gasket 24x19 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Brake line - from 150 to 200 cm

Brake line re-manufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original end pieces)Shipping after receiving your model.

Pair of front brake cylinders 28.5mm - Panhard 24 - 07/1964 to the endnch nov 57 a end

2 x front wheel cylinder left and right - d 28.57 mm. 3/8 entry Left side mounting. Length 72 mm - inside liquid passage = 8.5 mm. Assembly:

€168.00 TTC
(140,00 € HT)

Copper pipe fitting 7/16 - ext thread 11mm

Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm

Master cylinder Panhard PL 17 and 24

Master cylinder for Panhard Pl 17 and 24 - diam 22 mm. French made

€91.20 TTC
(76,00 € HT)

Copper gasket 16 x 21

Copper gasket 16 x 21 1.5mm thick

€1.80 TTC
(1,50 € HT)

Pipe Ø 8 mm from reservoir to master cylinder - 1 m

Brake line remanufactured upon request, exclusively in 8 mm diameter copper.Photo not contractually binding. Supplied WITHOUT fittings - you can order the one you need from our store (for the master cylinder side). The other end is bare (inlet on ...

Ecrou

Metal insert tip for jar

Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.

Special brake grease tube - 5g

Tube of special braking grease (5gr), Lockheed DOT and silicone compatible, protects steel cylinder and piston parts, helps them slide, compatible with rubber parts.

Brake line - from 0 to 50 cm

Brake line remanufactured on demand only in copper diameter 6.35 mm. Small model, length less than 50 cm. Provide model (length and 2 original tips) Shipping after receipt of your model.

Adapter fitting 3/8 UNF Male - 10x100 female

Adapter fitting 3/8 UNF Male - 10x100 female

Brake pipe - from 300 to 350 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.