Set of 4 FRONT brake shoes relined Renault SG2
Set of 4 front brake shoes relined in standard exchange for Renault SG2. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets that could damage the drums. Shipping upon receipt of worn parts.
€300.00 TTC
(250,00 € HT)
(250,00 € HT)
LEFT 28.5mm rear brake cylinder - Renault SG2 - 1965 to the end
LEFT REAR brake cylinder for single or double circuit, from 1965 to end of series.
€127.50 TTC
(106,25 € HT)
(106,25 € HT)
Special brake grease tube - Plastilub ATE - 75 ml
Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!
€13.80 TTC
(11,50 € HT)
(11,50 € HT)
Set of 4 relined rear brake shoes - Renault SG2
Set of 4 rear brake shoes relined in standard exchange for Renault SG2. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets that could damage the drums. Shipping upon receipt of worn parts.
€216.00 TTC
(180,00 € HT)
(180,00 € HT)
RIGHT rear brake cylinder 28.5mm - Renault SG2 - 1965 to the end
RIGHT REAR brake cylinder for single or double circuit, from 1965 to end of series.
€127.50 TTC
(106,25 € HT)
(106,25 € HT)
Master cylinder inside pistons 53 mm - NO brake assist - Renault Saviem Sg2
Single circuit master cylinder fits to SG2 Renault or Saviem. NO break assist. Internal diameter (piston) 28.57 mm bettween fixing holes : 60 mm 2 exits 7/16 mm (mesure prise sur le raccord mâle venant de canalisation = 11.1 mm)
€160.80 TTC
(134,00 € HT)
(134,00 € HT)
Adapter fitting 7/16 Male - 7/16 female outgoing cone
Adapter fitting 7/16 Male - 7/16 female outgoing cone
€19.56 TTC
(16,30 € HT)
(16,30 € HT)
3/8 - 24 f copper pipe fitting
Rigid brake line nut. 3/8 x 24 threads / inch. Tube Ø 4.75 mm
€7.80 TTC
(6,50 € HT)
(6,50 € HT)
Raccord adaptateur 1/2 UNF mâle - 3/8 UNF femelle
Adaptateur freinage 1/2-20 UNF mâle par 3/8 24 filets femelle
€12.60 TTC
(10,50 € HT)
(10,50 € HT)
Contactor: copper seal kit for LONG stop contactor 022114
Set of 2 seals for STOP LONG contactor
€3.60 TTC
(3,00 € HT)
(3,00 € HT)
Brake pipe - from 300 to 350 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
€90.84 TTC
(75,70 € HT)
(75,70 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
€5.40 TTC
(4,50 € HT)
(4,50 € HT)
Copper pipe fitting 7/16 - ext thread 11mm
Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm
€6.36 TTC
(5,30 € HT)
(5,30 € HT)
Hose 7.5x13.5 - brake jar / master cylinder - 1ml - Synthetic liquid DOT 4
Hose sold by the meter for jar connection to master cylinder (7.5 mm plastic nipple connection) - 13.5 mm outsideDoes not withstand pressure. TYPE EPDM + textile reinforcement - intended only for synthetic fluid type DOT 4 - Not suitable for ...
€12.60 TTC
(10,50 € HT)
(10,50 € HT)
