Adapter fitting 3/8 UNF Male - 10x100 female
Adapter fitting 3/8 UNF Male - 10x100 female
€20.40 TTC
(17,00 € HT)
(17,00 € HT)
Front brake hose 550 mm - Simca 5
Front brake hose - Length 550 mm - 2 threaded ends Ø 17 mm.
€39.90 TTC
(33,25 € HT)
(33,25 € HT)
Adapter connection 1/2 UNF female - 3/8 UNF male
Braking adapter 1 / 2-20 UNF female by 3/8 24 male threads
€11.88 TTC
(9,90 € HT)
(9,90 € HT)
Special brake grease tube - Plastilub ATE - 75 ml
Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!
€13.80 TTC
(11,50 € HT)
(11,50 € HT)
Brake reservoir with rubber
Translucent tank, delivered with bracket; rubber plug and fitting.
€38.40 TTC
(32,00 € HT)
(32,00 € HT)
Metal insert tip for jar
Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.
€10.80 TTC
(9,00 € HT)
(9,00 € HT)
Brake line - from 200 to 250 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
€76.44 TTC
(63,70 € HT)
(63,70 € HT)
Pipe connection 1/2 20 UNF - 8 mm tube - special jar - 12.5 mm thread ext.
Rigid brake line nut. 1 / 2-20 UNF i.e. Ø 12.5 mm - drilling for 8 mm tube special brake reservoir
€6.18 TTC
(5,15 € HT)
(5,15 € HT)
Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone
Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone
€18.00 TTC
(15,00 € HT)
(15,00 € HT)
Adapter fitting 7/16 Male - 7/16 female outgoing cone
Adapter fitting 7/16 Male - 7/16 female outgoing cone
€19.56 TTC
(16,30 € HT)
(16,30 € HT)
Viewed products
Set of 2 Ford Vedette pivots 1949-52
Set of 2 pivots (in standard exchange), ready to install. The set includes 1 pivot G + 1 pivot D, new bronze bushings, treated steel pivot pins, rectified axis line.Mounts on:- Ford Vedette from 1949 to 52- some Vedette 1953- Comète 13 and 22cv, ...
€426.20 TTC
(426,20 € HT)
(426,20 € HT)
Rear brake hose 590mm - Prairie Goelette
Rear brake hose - Length 590 mm - 2 threaded ends d 17 mm.
€39.90 TTC
(33,25 € HT)
(33,25 € HT)
Front brake cylinder 31.7 mm - Renault Goelette 1ere generation
Front wheel cylinder. Diam 1 "1/4 or 31.5 mm. Fixing by 2 metric type M6x100 screws 36mm center distance.Inlet diam = 9.8 mm 7/16 -20 threads / pPlease note: this model is mainly used in first-generation Renault Goélette style vans with an 85 ...
€84.00 TTC
(70,00 € HT)
(70,00 € HT)
Peugeot 203 403 lower hose after 05/55
Lower hose for Peugeot 203 or 403 from 05/1955
€28.80 TTC
(24,00 € HT)
(24,00 € HT)
Pistons liners kit Ø 54.50 base 60 Renault 680.01 and -02 - 747 CM3 4CV
Pistons liners kit Ø54.50 base 60 Renault 680.01 and -02 - 747 CM3 4CV
€330.00 TTC
(275,00 € HT)
(275,00 € HT)
Set of 8 pistons 66.04 Simca Versailles Chambord
Set of 8 pistons original dimension (66.04 mm) complete (with segments, pins and clips). Aluminum body, quality segmentation with spring-loaded oil scrapers. Flat heads. Mounts on Simca Trianon, Versailles, Régence, Beaulieu, Chambord, ...
€1,432.80 TTC
(1 194,00 € HT)
(1 194,00 € HT)
Ignition protected harness Peugeot 203 - 403 petrol
Ignition harness for Peugeot 203/403 petrol engine.Current quality manufacture in red silicone.
€57.60 TTC
(48,00 € HT)
(48,00 € HT)
