Complete master cylinder - Simca 5
Complete master cylinder - Simca 5 - French manufacturing
€87.60 TTC
(73,00 € HT)
(73,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
€5.40 TTC
(4,50 € HT)
(4,50 € HT)
Pipe connection 1/2 20 UNF - 8 mm tube - special jar - 12.5 mm thread ext.
Rigid brake line nut. 1 / 2-20 UNF i.e. Ø 12.5 mm - drilling for 8 mm tube special brake reservoir
€6.18 TTC
(5,15 € HT)
(5,15 € HT)
Special brake grease tube - Plastilub ATE - 75 ml
Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!
€13.80 TTC
(11,50 € HT)
(11,50 € HT)
Brake line - from 150 to 200 cm
Brake line re-manufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original end pieces)Shipping after receiving your model.
€69.24 TTC
(57,70 € HT)
(57,70 € HT)
Brake pipe - from 250 to 300 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
€83.64 TTC
(69,70 € HT)
(69,70 € HT)
Metal insert tip for jar
Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.
€10.80 TTC
(9,00 € HT)
(9,00 € HT)
Simca 5 front brake shoe set 4
Set of 4 refurbished front brake shoes, in standard exchange (Send us your set before shipping the new one).High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.(Non ...
€102.00 TTC
(85,00 € HT)
(85,00 € HT)
Brake line - from 200 to 250 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
€76.44 TTC
(63,70 € HT)
(63,70 € HT)
Rear brake hose 420 mm - Simca 5
Rear brake hose - 420 mm long - 2 Ø17 mm threaded ends.
€30.00 TTC
(25,00 € HT)
(25,00 € HT)
Simca 5 rear brake shoe set 4
Set of 4 rear brake shoes in standard exchange. (Send us your game before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished jaws.
€102.00 TTC
(85,00 € HT)
(85,00 € HT)
Viewed products
Master cylinder kit Renault Colorale Prairie R2087 Goelette
Repair kit for 1 "1/4 or 31.75 mm master cylinder.
€58.80 TTC
(49,00 € HT)
(49,00 € HT)
Front hub kit Simca Versailles - Chambord 58/60
Front hub repair kit with D 19mm spindle, for Trianon, Versailles, Régence, Marly 1. All models (except 1954), including Chambord 58 to 601 outer conical bearing1 internal tapered bearing1 sealed ringValid for one wheel. Be careful not to fit on ...
€117.60 TTC
(98,00 € HT)
(98,00 € HT)
3/8 - 24 f copper pipe fitting
Rigid brake line nut. 3/8 x 24 threads / inch. Tube Ø 4.75 mm
€7.80 TTC
(6,50 € HT)
(6,50 € HT)
Flexible rear brake hose 349 mm Simca Versailles Chambord Ariane
Flexible rear brake hose 349 mm long. Male ext 9mm - female int Ø 8.3 mm. Don't forget to replace the copper gasket: click here a> (The vehicle has only 1 rear flexible) - Simca Beaulieu, Chambord, Présidence, Marly 2, Ariane 4 and ...
€32.40 TTC
(27,00 € HT)
(27,00 € HT)
demarreur adapatble 12 v SAVIEM moteur 671 /817
€276.00 TTC
(276,00 € HT)
(276,00 € HT)
Front brake cylinder 38.1 mm - SUMB Marmon
For Simca SUMB Marmon and other heavy-duty derivatives.Complete front wheel cylinder d 38mm.
€124.80 TTC
(104,00 € HT)
(104,00 € HT)
1/2 female 20 UNF connection on 8 mm tube (metal brake jar)
Metal tank foot nut (female 1/2 and d 8mm)
€11.10 TTC
(9,25 € HT)
(9,25 € HT)
