sticker Simca oil filter
Sticker for oil filter and breather plug. Mounts on V8 engine
€9.63 TTC
(9,63 € HT)
(9,63 € HT)
CHAMBORD exhaust - n2 - stainless steel primary tube - Simca Chambord
Primary tube between the "Y" and the silencer - Part 2 on the photoAll stainless steel.
€116.40 TTC
(97,00 € HT)
(97,00 € HT)
Exhaust suspension ring 63x96 width 27 mm - Peugeot 203
Suspension ring for Peugeot 203 exhaust and othersDimension approximately 63 x 96 x width 27 mm
€11.00 TTC
(11,00 € HT)
(11,00 € HT)
Segments set Ø 67.00 mm Simca Chambord 2.5 x 2.5 x 4 - 8cyl
Jeu pour 8 Cylindre(s) Ø 67 - 8 segment 67 x 2,5 x 2,8 C1 - 8 segment 67 x 2,5 x 2,9 S11 - 8 segment 67,5 x 4 x 3 O23 Note : Racleur -> diamètre légèrement supérieur à celui demandé (revoir jeu à la coupe).
€172.80 TTC
(144,00 € HT)
(144,00 € HT)
Pressure hose for igniter Ø 5.5 mm - by the meter
Hose to connect the igniter / carburetor depression 5.5 mm sold by the meter.
€10.20 TTC
(8,50 € HT)
(8,50 € HT)
Head ignition for RB Ducellier Ford starter Simca Versailles
Head for RB Ducellier distributor, distributor mounted on V8 Simca Versailles, Chambord etc. Can also be mounted on Marmon with petrol V8 equipped with civilian ignition.
€54.00 TTC
(45,00 € HT)
(45,00 € HT)
Segment set Ø 66.04 mm Simca Chambord 2.38x2.38x5x5 - 8cyl
Segment set Ø 66.04 mm Simca 2.38x2.38x5x5 - 8cyl
€256.80 TTC
(214,00 € HT)
(214,00 € HT)
Bearing 6203 - 17x40x12
Bearing - 17x40x12 waterproof (often used on dynamo, water pump, flywheel center, etc.). Check with the dimensions of your bearing.
€10.80 TTC
(9,00 € HT)
(9,00 € HT)
Ring set Ø 66.50 mm Simca 2.50x2.50x4 - 8cyl
Ring set Ø 66.50 mm Simca 2.50x2.50x4 - 8cyl
€187.20 TTC
(156,00 € HT)
(156,00 € HT)
Seal on V8 oil filter housing Simca Versailles Chambord
Circular seal for Ford Vedette, Vendôme and Simca Vedette oil filter housing.Mounts on a cover or on a base depending on the model and year.
€8.96 TTC
(8,96 € HT)
(8,96 € HT)
ECH valve Simca Versailles - Chambord
Exhaust valve for Simca Trianon, Versailles, Régence, Beaulieu, Chambord, Présidence, Marly 1 and 2, Ariane 8.Product from old stocks or reconditioned used product. - Delivered rectified and ready to fit.
€44.00 TTC
(44,00 € HT)
(44,00 € HT)
Battery switch - safety
Battery isolator - used to electrically isolate the battery. To be placed on a terminal of the battery.
€12.00 TTC
(10,00 € HT)
(10,00 € HT)
Fuel gauge - replacement float
Float in synthetic material resistant to current fuels. Used to replace the cork floats on the fuel gauge Length: 1.40" Diameter: 1.14"
€17.72 TTC
(17,72 € HT)
(17,72 € HT)
Ignition set 8 spark plugs V8 Ford Vedette Simca Versailles Chambord
Set of 8 NGK spark plugs for Ford Vedette, Comète, Vendôme, Monte Carlo and Simca Trianon, Versailles, Régence, Beaulieu, Chambord, Présidence, Marly 1 and 2 engines. Thermal index adapted to fuel Lead Free 95 and 98.
€48.00 TTC
(40,00 € HT)
(40,00 € HT)
12v to 6v regulator for temperature, pressure, fuel gauge
This module allows the use of 6V pressure gauges on a 12V vehicle (negative to ground). Mounts on a temperature gauge, pressure, fuel gauge, ...Very practical, it is fixed directly on the supply terminal of the pressure gauge thanks to a hole ...
€36.00 TTC
(30,00 € HT)
(30,00 € HT)
Viewed products
Manometer Tachometer - 2 - 4 - 6 - 8 cyl - electric 12V - ivory background - for negative to mass
Mano "OS" Tachometer 0 to 5000 rpm for 4-cylinder petrol engine. Connects to the "break" terminal on the ignition coil. 52 mm recess on the pressure gauge side. delivered with lighting. for negative to ground
€69.95 TTC
(58,29 € HT)
(58,29 € HT)
Ignition finger igniter RB Ducellier Simca Versailles Chambord
" Finger for igniter mounted on Simca V8. Incompatible with igniter mounted on Ford Vedette. "
€12.96 TTC
(10,80 € HT)
(10,80 € HT)
echappement silencieux inox aquilon