Electronic igniter finger straight outputs

Electronic igniter finger straight outputs

12v to 6v regulator for temperature, pressure, fuel gauge

This module allows the use of 6V pressure gauges on a 12V vehicle (negative to ground). Mounts on a temperature gauge, pressure, fuel gauge, ...Very practical, it is fixed directly on the supply terminal of the pressure gauge thanks to a hole ...

copy of deposit

setpoint if a pump is not supplied in standard exchange

Belt 17x969 mm

Belt :Width: 17mmExternal length: 969 mmInternal length: 900 mm

Modification usinage 4 x pistons Ø 85.00

Electric Easy Drive power steering kit

electronic distributor head straight outputs

electronic distributor head straight outputs

Aviation collex type paste gasket for cylinder head - 450ml

Sealing paste to be applied on both sides of a cylinder head gasket. Product similar to "Collex". Leave to evaporate for about 30 min at room temperature after application, then fit the gasket - improves the seal - recommended with solid copper ...

Manometer Tachometer - 2 - 4 - 6 - 8 cyl - electric 12V - black background - for negative to mass

Mano "OS" Tachometer 0 to 5000 rpm for 4-cylinder petrol engine. Connects to the "break" terminal on the ignition coil. 52 mm recess on the pressure gauge side. delivered with lighting. for negative to ground

Bielle Ford V sans ergot - occasion

Temperature manometer with probe - black background

Mano "OS" temperature indicator (without electrical connection). Direct reading by probe mounted on a radiator hose (high outlet). 52 mm recess on the pressure gauge side.Capillary 1m80. Delivered with lighting and probe for the hose.

Ø53 segment 3x2.3 021 + segment 2x2.2 C1

SEV finger ignition large model

Finger for SEV igniter (large model)

Copper cylinder head gasket - Citroen trefle 5HP

Copper cylinder head gasket - Citroen trefle

Regulator converter 12v to 6V 15 A (wiper - ventilation)

Ignition finger igniter Ducellier 65mm

Finger for Ducellier distributor equipped with a 65mm headMounts with Ducellier 65 mm head