Set of 4 relined REAR 30mm larg - brake shoes - Panhard

Set of 4 relined brake shoes (front or rear) 195 mm x 30 mm in standard exchange for Panhard Dyna X86, Dyna Z, PL 17 and series 24Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could ...

€102.00 TTC
(85,00 € HT)

Copper seal 10.2 x 13.5

Copper gasket 10.2 x 13.5 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

7/16 female connection on 6.35 mm tube

7/16 connection on 6.35 mm tube

Brake hose 412 mm rear G Panhard PL 17

Rear brake hose G Panhard PL 17 - from April 1962 to the end (Record fitting) - length 412 mm

Copper gasket 12 x 18 mm

Copper gasket 12 x18 x  1.5mm thick

€1.80 TTC
(1,50 € HT)

Male connector 12x100 on 6.35 mm pipe

Male connector 12x100 on 6.35 mm pipe

Brake line - from 200 to 250 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.

Dot 4 brake fluid

Dot 4 brake fluid - 500ml can. Non contractual photo

Ecrou

Pipe Ø 8 mm from reservoir to master cylinder - 1 m

Brake line remanufactured upon request, exclusively in 8 mm diameter copper.Photo not contractually binding. Supplied WITHOUT fittings - you can order the one you need from our store (for the master cylinder side). The other end is bare (inlet on ...

Adapter connection 7/16 male - 11/16 female

Adaptateur freinage  mâle 7/16 (envion 11mm) femelle 11/16 pour recevoir gros flexible (17mm mâle

Silicone brake fluid DOT 5 - 1L

" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "

Front brake hose 470 mm male 7/16 - Panhard PL 17

Front brake hose PL17 from 1960 to end of series. Male thread 7/16 (11.1 mm) - length 470 mm

Brake line - from 0 to 50 cm

Brake line remanufactured on demand only in copper diameter 6.35 mm. Small model, length less than 50 cm. Provide model (length and 2 original tips) Shipping after receipt of your model.

Rear brake cylinder 19mm - 3/8 Panhard 24 - 07/1964 to end

Rear wheel cylinder 19mm  - Panhard 24 équipé frein à tambours - 07/1964 à fin de série

€69.12 TTC
(57,60 € HT)

Master cylinder Panhard PL 17 and 24

Master cylinder for Panhard Pl 17 and 24 - diam 22 mm. French made

€91.20 TTC
(76,00 € HT)