FRONT LEFT 28.5mm brake cylinder - Panhard PL 17 - 60 a 62
Front wheel cylinder L PL17 from 1960 to March 62 - d 28.57 mm. Entry 3/8 - Left side mounting. Length 72 mm - inside liquid passage = 8.5 mm
€84.00 TTC
(70,00 € HT)
(70,00 € HT)
3/8 - 24 f copper pipe fitting
Rigid brake line nut. 3/8 x 24 threads / inch. Tube Ø 4.75 mm
€7.80 TTC
(6,50 € HT)
(6,50 € HT)
Adapter connection 7/16 male - 3/8 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 3/8
€22.80 TTC
(19,00 € HT)
(19,00 € HT)
Pipe Ø 8 mm from reservoir to master cylinder - 1 m
Brake line remanufactured upon request, exclusively in 8 mm diameter copper.Photo not contractually binding. Supplied WITHOUT fittings - you can order the one you need from our store (for the master cylinder side). The other end is bare (inlet on ...
€50.40 TTC
(42,00 € HT)
(42,00 € HT)
Brake line - from 150 to 200 cm
Brake line re-manufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original end pieces)Shipping after receiving your model.
€69.24 TTC
(57,70 € HT)
(57,70 € HT)
FRONT RIGHT 28.5mm brake cylinder - Panhard PL 17 - 60 to 62
Front wheel cylinder L PL17 from 1960 to March 62 - d 28.57 mm. Entry 3/8 - Right mounting. Length 72 mm - inside liquid passage = 8.5 mm
€84.00 TTC
(70,00 € HT)
(70,00 € HT)
Metal insert tip for jar
Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.
€10.80 TTC
(9,00 € HT)
(9,00 € HT)
Panhard PL 17 rear brake hose 236 mm
Rear brake hose PL 17 from 1960 to end of series - long 236 mm
€32.40 TTC
(27,00 € HT)
(27,00 € HT)
Special brake grease tube - Plastilub ATE - 75 ml
Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!
€13.80 TTC
(11,50 € HT)
(11,50 € HT)
Brake pipe - from 250 to 300 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
€83.64 TTC
(69,70 € HT)
(69,70 € HT)
FRONT LEFT 28.5mm brake cylinder - Panhard PL 17 - Record mounting - 04/62 and fin
Front wheel cylinder L PL 17 - Record mounting - 04/62 and fine - d 28.57 mm. Left mounting.64 mm long - inside liquid passage = 10 mm
€66.00 TTC
(55,00 € HT)
(55,00 € HT)
