Segment set Simca 5 - 53.50 mm 2x2x2x2x3
Set of 20 segments (5 per piston).Composition:Cylinder bore 53.50 mm16 waterproof segments, 2 mm high4 scraper segment height 3mmOther dimensions available, contact us.
€192.12 TTC
(160,10 € HT)
(160,10 € HT)
Gasket paste for motor - auto extrudable cartridge 200 ml
Mot. Silicone gasket & self-extruding housing RTV K164 high-quality, heat-resistant silicone base: modified oxime silicone (acid-free hardening system)
€42.00 TTC
(35,00 € HT)
(35,00 € HT)
Engine red paint - 500 ml -
Engine red paint -Pot of 500 mlSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated with our Phosprim ...
€40.80 TTC
(34,00 € HT)
(34,00 € HT)
Double pressure gauge holder
Metal support, black lacquered for standard manometer D52 mm. Ready to fix.
€12.00 TTC
(10,00 € HT)
(10,00 € HT)
Bearing 6203 - 17x40x12
Bearing - 17x40x12 waterproof (often used on dynamo, water pump, flywheel center, etc.). Check with the dimensions of your bearing.
€10.80 TTC
(9,00 € HT)
(9,00 € HT)
Pistons complets - jeu de 4 - Ø 52.50 mm - Simca 5
Set of 4 piston Ø 52.50 mm - Simca 5.
€648.00 TTC
(540,00 € HT)
(540,00 € HT)
Engine paint oxide green RAL 6020 - 500 ml
Engine paint oxide green RAL 6020 -Pot of 500 mlSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated ...
€40.80 TTC
(34,00 € HT)
(34,00 € HT)
Segment set Simca 5 - 52.50 mm 2x2x3x3
Set of 16 segments (4 per piston).Composition:Cylinder bore 52.50 mm8 waterproof segments, 2 mm high8 scraper segment height 3mmOther dimensions available, contact us.Contact us to define the height of each segment.
€150.00 TTC
(125,00 € HT)
(125,00 € HT)
Fuel needle - Solex 32 PBIC carburettor or similar
Fuel needle - Solex 32 PBIC carburettor or similar
€11.88 TTC
(9,90 € HT)
(9,90 € HT)
Segment set Simca 5 - 52 mm (4 sealed / 1 scraper)
Set of 20 segments (5 per piston).Composition:Cylinder bore 52.50 mm16 waterproof segments, 2 mm high4 scraper segment height 3mmOther dimensions available, contact us.
€189.60 TTC
(158,00 € HT)
(158,00 € HT)
Mechanism clutch Simca 5
Clutch mechanism reconditioned, in standard exchange. Mounted on Simca 5, etc ...Complete disassembly, micro balling, surfacing and retaring of the pressure plate.(The sending is done after receipt of the used mechanism, not destroyed - Depending ...
€276.00 TTC
(230,00 € HT)
(230,00 € HT)
Aviation collex type paste gasket for cylinder head - 450ml
Sealing paste to be applied on both sides of a cylinder head gasket. Product similar to "Collex". Leave to evaporate for about 30 min at room temperature after application, then fit the gasket - improves the seal - recommended with solid copper ...
€42.00 TTC
(35,00 € HT)
(35,00 € HT)
Pistons complets - jeu de 4 - Ø 53.50 mm - Simca 5
Set of 4 piston Ø 53.50 mm - Simca 5.
€648.00 TTC
(540,00 € HT)
(540,00 € HT)
Fuel gauge - replacement plastic float
White plastic float. Used to replace ring gauge floats.
€15.00 TTC
(12,50 € HT)
(12,50 € HT)
Calibrouge (Plastigage) mechanical clearance measurement
"Plastigage"The Calibrouge ("plastigage or plastigauge") is a simple and practical tool for measuring the clearances of your bearings. Range of use: operating clearance from 0.025 to 0.175 mm
€27.00 TTC
(22,50 € HT)
(22,50 € HT)
Reinforced collar for exhaust - Ø 52-55 mm
Reinforced collar for exhaust - Ø 52.55 mmRobust French manufacturing
€6.50 TTC
(5,42 € HT)
(5,42 € HT)
