Aviation collex type paste gasket for cylinder head - 450ml
Sealing paste to be applied on both sides of a cylinder head gasket. Product similar to "Collex". Leave to evaporate for about 30 min at room temperature after application, then fit the gasket - improves the seal - recommended with solid copper ...
€42.00 TTC
(35,00 € HT)
(35,00 € HT)
Bearing 6203 - 17x40x12
Bearing - 17x40x12 waterproof (often used on dynamo, water pump, flywheel center, etc.). Check with the dimensions of your bearing.
€10.80 TTC
(9,00 € HT)
(9,00 € HT)
Segment set Simca 5 - 52.50 mm 2x2x2x3
Set of 16 segments (4 per piston) - Cylinder bore 52.50 mmComposition:12 waterproof segments, 2 mm high4 scraper segments 3mm high. Non contractual photo.Other dimensions available, contact us to define the height of each segment.
€158.64 TTC
(132,20 € HT)
(132,20 € HT)
Manometer Tachometer - 2 - 4 - 6 - 8 cyl - electric 12V - ivory background - for negative to mass
Mano "OS" Tachometer 0 to 5000 rpm for 4-cylinder petrol engine. Connects to the "break" terminal on the ignition coil. 52 mm recess on the pressure gauge side. delivered with lighting. for negative to ground
€69.95 TTC
(58,29 € HT)
(58,29 € HT)
Reinforced collar for exhaust - Ø 44-47 mm
Reinforced collar for exhaust - Ø 44-47 mmRobust French manufacturing
€5.80 TTC
(4,83 € HT)
(4,83 € HT)
Simca 5 disc clutch
Clutch disc reconditioned, in standard exchange, Simca 5. Complete disassembly, micro balling and painting.The sending is done after receipt of the used mechanism, not destroyed(Depending on the year, non-contractual photo)
€107.10 TTC
(89,25 € HT)
(89,25 € HT)
Engine paint oxide green RAL 6020 - 500 ml
Engine paint oxide green RAL 6020 -Pot of 500 mlSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated ...
€40.80 TTC
(34,00 € HT)
(34,00 € HT)
Segment set Simca 5 - 52 mm - 2x2x3x3
Set of 16 segments (4 per piston).Composition:Cylinder bore 52 mm8 waterproof segments, 2 mm high8 scraper segment height 3mmOther dimensions available, contact us.
€150.00 TTC
(125,00 € HT)
(125,00 € HT)
Calibrouge (Plastigage) mechanical clearance measurement
"Plastigage"The Calibrouge ("plastigage or plastigauge") is a simple and practical tool for measuring the clearances of your bearings. Range of use: operating clearance from 0.025 to 0.175 mm
€27.00 TTC
(22,50 € HT)
(22,50 € HT)
Segment set Simca 5 - 53 mm 2x2x2x3
Set of 16 segments (4 per piston).Composition:Cylinder bore 53.00 mm12 waterproof segments, 2 mm high4 scraper segment height 3mmOther dimensions available, contact us.
€150.00 TTC
(125,00 € HT)
(125,00 € HT)
Manometer Tachometer - 2 - 4 - 6 - 8 cyl - electric 12V - black background - for negative to mass
Mano "OS" Tachometer 0 to 5000 rpm for 4-cylinder petrol engine. Connects to the "break" terminal on the ignition coil. 52 mm recess on the pressure gauge side. delivered with lighting. for negative to ground
€69.95 TTC
(58,29 € HT)
(58,29 € HT)
Dark green engine paint RAL 6005 - 500 ml
Dark green engine paint RAL 6005 -Pot of 500 mlSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated ...
€40.80 TTC
(34,00 € HT)
(34,00 € HT)
Double pressure gauge holder
Metal support, black lacquered for standard manometer D52 mm. Ready to fix.
€12.00 TTC
(10,00 € HT)
(10,00 € HT)
Ignition coil 12v VALEO
Ignition coil guaranteed for use with a 12 V platinum screw igniter (breakers). Impedance respected to prevent the breakers from bluing.Works perfectly also with electronic module or integral electronic igniter. (Non contractual photo)
€60.00 TTC
(50,00 € HT)
(50,00 € HT)
Aviation collex type paste gasket for cylinder head - 117ml
Sealing paste to be applied on both sides of a cylinder head gasket. Product similar to "Collex". Leave to evaporate for about 30 min at room temperature after application, then fit the gasket - improves the seal - recommended with solid copper ...
€30.00 TTC
(25,00 € HT)
(25,00 € HT)
Temperature manometer with probe - black background
Mano "OS" temperature indicator (without electrical connection). Direct reading by probe mounted on a radiator hose (high outlet). 52 mm recess on the pressure gauge side.Capillary 1m80. Delivered with lighting and probe for the hose.
€78.00 TTC
(65,00 € HT)
(65,00 € HT)
