Copper gasket 12 x 18 mm

Copper gasket 12 x18 x  1.5mm thick

€1.80 TTC
(1,50 € HT)

Copper pipe fitting 7/16 - ext thread 11mm

Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm

Copper gasket 15.3 x 21

Copper gasket 15.30 x 21.00 th 1mm

€1.80 TTC
(1,50 € HT)

copy of Brake line - Ø 4.5 mm - 0 to 50 cm

Brake line remanufactured on demand only in copper diameter 4.5 mm.

Handbrake cable left or right from 1963 - Citroen HY

Handbrake cable for left or right wheel - 1963 end of series (ID19 engine) - Citroen HYYou need 2 per vehicle (sold individually)

Front brake hose 328 mm - Citroen HY - June 1963 to end

FRONT brake hose for Citroen from June 1963 to end of series. The end caps are different from each other)Long 328 mm

Special brake grease tube - Plastilub ATE - 75 ml

Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!

Rear brake hose with double connections on pipe - 320 mm - Citroen HY - after 1970

Brake hose for Citroën HY. Model equipped with fittings allowing connection with rotating nut on rigid pipe on both sides. Often fitted after 1970 - Long 320 mm. Only for synthetic liquid (Dot 3, Dot 4). For use with LHM call us

Set of 4 front brake shoes 55 mm - HY or type H Citroen - 02/1962 to 1981

Set of 4 front brake shoes 55 mm - HY or type H Citroen - 02/1962 to 1981 - standard exchange. (Send us your set before shipping the new one). High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled ...

€180.00 TTC
(150,00 € HT)

Citroen HY 22mm rear brake cylinder

Rear brake cylinder for Citroen HY or type H piston diameter = 22 mm. (until 1966)All the brake parts we sell are made in France.

€76.74 TTC
(63,95 € HT)

Set of 4 front brake shoes 45 mm - HY or type H Citroen - until 02/1962

Set of 4 front brake shoes - standard exchange. (Send us your set before shipping the new one). High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.

€134.90 TTC
(112,42 € HT)

Ressort frein arrière - Citroen HY - type H

Copper gasket 10.5 x 20

Copper gasket 10.5 x 20 thickness 1mm

€1.80 TTC
(1,50 € HT)

Brake line - from 0 to 50 cm

Brake line remanufactured on demand only in copper diameter 6.35 mm. Small model, length less than 50 cm. Provide model (length and 2 original tips) Shipping after receipt of your model.

Brake pipe - from 250 to 300 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.

Special brake grease tube - 5g

Tube of special braking grease (5gr), Lockheed DOT and silicone compatible, protects steel cylinder and piston parts, helps them slide, compatible with rubber parts.