Front brake hose 328 mm - Citroen HY - June 1963 to end
FRONT brake hose for Citroen from June 1963 to end of series. The end caps are different from each other)Long 328 mm
€30.00 TTC
(25,00 € HT)
(25,00 € HT)
Brake pipe - from 300 to 350 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
€90.84 TTC
(75,70 € HT)
(75,70 € HT)
Rear brake hose D 400mm - Citroen HY - from June 1963 to the end
Brake hose REAR RIGHT for Citroen from June 1963 to end: HZ HY HWLong 400 mm
€30.00 TTC
(25,00 € HT)
(25,00 € HT)
Brake reservoir with rubber
Translucent tank, delivered with bracket; rubber plug and fitting.
€38.40 TTC
(32,00 € HT)
(32,00 € HT)
Copper pipe fitting 7/16 - ext thread 11mm
Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm
€6.36 TTC
(5,30 € HT)
(5,30 € HT)
Fuel pump - GUIOT 90 mm diaphragm kit Citroen Traction U23 HY
Replacement diaphragm for GUIOT fuel pump (Citroen Traction U23 HY engine). Ø 90mm. Supplied with membrane and gaskets. (check the type of pump before ordering)
€30.00 TTC
(25,00 € HT)
(25,00 € HT)
Rear brake hose with double connections on pipe - 320 mm - Citroen HY - after 1970
Brake hose for Citroën HY. Model equipped with fittings allowing connection with rotating nut on rigid pipe on both sides. Often fitted after 1970 - Long 320 mm. Only for synthetic liquid (Dot 3, Dot 4). For use with LHM call us
€32.40 TTC
(27,00 € HT)
(27,00 € HT)
Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone
Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone
€18.00 TTC
(15,00 € HT)
(15,00 € HT)
Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
€47.64 TTC
(39,70 € HT)
(39,70 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
€11.40 TTC
(9,50 € HT)
(9,50 € HT)
Adapter connection 7/16 male - 11/16 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 11/16 pour recevoir gros flexible (17mm mâle
€38.64 TTC
(32,20 € HT)
(32,20 € HT)
Brake line - from 200 to 250 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
€76.44 TTC
(63,70 € HT)
(63,70 € HT)
Citroen HY 22mm rear brake cylinder
Rear brake cylinder for Citroen HY or type H piston diameter = 22 mm. (until 1966)All the brake parts we sell are made in France.
€76.74 TTC
(63,95 € HT)
(63,95 € HT)
Special brake grease tube - 5g
Tube of special braking grease (5gr), Lockheed DOT and silicone compatible, protects steel cylinder and piston parts, helps them slide, compatible with rubber parts.
€4.67 TTC
(3,89 € HT)
(3,89 € HT)
set 4 front brake cylinder 31.7mm -Citroen HY - H - HZ
Set of 4 front brake cylinders (internal diameter 31.75 mm) can be mounted on all HY, type H, Hz and Traction 15/6Includes 2 cylinders with bleeder G and D + 2 cylinders without bleeder G and D. The braking parts we sell are made in France.
€429.60 TTC
(358,00 € HT)
(358,00 € HT)
