Segment clearance Ø 72 mm - 2.5 x 2.5 x 3 x 4 - Simca 9 - Aronde
Set of 16 segments for 4 pistons dimension Ø 72 mm - Simca 9 or Aronde enginecomposition per plunger:4 x fire segment 2.5 mm4 x compression in 2.5 mm4 x compression in 3 mm4 x scraper in 4 mmPossibility to order in 85 mm (call us) - ...
€123.60 TTC
(103,00 € HT)
(103,00 € HT)
Valve guides x 4 ADM ECH - 9x61x 15.14 ORIGIN - Renault Fregate - Prairie - Goelette - R2087 - SG2
Set of 4 valve guides (cast iron) dimensions approx. 61 x Ø 15.14 - Ø int 9 mm - ADM and ECH - Fitting on gasoline engine 668 - 671 - 817 Renault. Suitable for cylinder heads fitted with 2 rocker arms separated by the central greasing tee.French ...
€90.00 TTC
(75,00 € HT)
(75,00 € HT)
Pressure hose for igniter Ø 5.5 mm - by the meter
Hose to connect the igniter / carburetor depression 5.5 mm sold by the meter.
€10.20 TTC
(8,50 € HT)
(8,50 € HT)
Rod bearings Renault Goelette Fregate dimension 0.50 - 54.50 mm
Set of 8 connecting rod bearings (with lubricating hole for the connecting rod) dimension 0.25 crankpin d 44.50 mm - Renault, Colorale, Goélette, R2087, Frégate, SG2, etc).Mounts on engine 668 - 11cv - 2L, 671 - 12cv - 2.2 L and Super Etendard ...
€540.00 TTC
(450,00 € HT)
(450,00 € HT)
Reinforced collar for exhaust - Ø 64-67 mm
Reinforced collar for exhaust - Ø 64-67 mmRobust French manufacturing
€7.80 TTC
(6,50 € HT)
(6,50 € HT)
IGOL Rallye Gear axle transmission oil SAE 75 80 90 - GL4
Oil for gearbox and bridge for old mechanics. Type SAE 75 80 90 - GL4. 1L container.(Not suitable for Peugeot type screw axles)
€18.00 TTC
(15,00 € HT)
(15,00 € HT)
603 cylinder head gasket Renault side engine 85
Head gasket - Renault lateral 85 - 603. 195 x 480 mmPlease note that there are several versions depending on the type of 603. Check the shape with the photo and in particular the igniter passage hole located at the edge of half of the long length.
€162.00 TTC
(135,00 € HT)
(135,00 € HT)
Segment clearance Ø 72 mm - 3 x 2.5 x 2.5 x 4 - Simca 9 - Aronde
Set of 16 segments for 4 pistons dimension Ø 72 mm - Simca 9 or Aronde enginecomposition per plunger:4 x fire segment 2.5 mm8 x compression in 3 mm4 x scraper in 4 mmPossibility to order in 85 mm (call us) - Non-contractual photo
€123.60 TTC
(103,00 € HT)
(103,00 € HT)
Exhaust suspension ring 63x96 width 27 mm - Peugeot 203
Suspension ring for Peugeot 203 exhaust and othersDimension approximately 63 x 96 x width 27 mm
€11.00 TTC
(11,00 € HT)
(11,00 € HT)
Aerosol gasket for cylinder head
Sealing spray varnish to be sprayed on both sides of a cylinder head gasket. Improves sealing, essential with solid copper gaskets (any thickness)
€42.00 TTC
(35,00 € HT)
(35,00 € HT)
Engine belt type Fregate Renault Goelette Prairie Fregate pulley 147
Belt for Renault type 668 and 671 engine (Colorale, Goélette, R2087, Frégate, etc) Assembly with water pump pulley D 147 mm - (We also have the belt for pulley 112 mm )
€30.00 TTC
(25,00 € HT)
(25,00 € HT)
Exhaust manifold tube Renault R2087 Colorale Goelette
Exhaust manifold tube for Renault Colorale, Prairie, Goélette, R2087 and derivatives.(Depending on the version, the assembly may require adaptation)
€84.90 TTC
(70,75 € HT)
(70,75 € HT)
Aviation collex type paste gasket for cylinder head - 117ml
Sealing paste to be applied on both sides of a cylinder head gasket. Product similar to "Collex". Leave to evaporate for about 30 min at room temperature after application, then fit the gasket - improves the seal - recommended with solid copper ...
€41.22 TTC
(34,35 € HT)
(34,35 € HT)
Renault Frégate rear cylinder head plate gasket
Cylinder head plate gasket for renault fregate engine.Model for clutch side
€6.00 TTC
(5,00 € HT)
(5,00 € HT)
