4 x exhaust valve 35.5x116x9 mm - 4 notches - Renault Fregate Prairie Goelette
Exhaust valve 35 x 9 long 116 mm for Renault Fregate engine and derivatives (used part)
€86.40 TTC
(72,00 € HT)
(72,00 € HT)
Rod bearings Renault Goelette Fregate dimension 0.50 - 54.50 mm
Set of 8 connecting rod bearings (with lubricating hole for the connecting rod) dimension 0.25 crankpin d 44.50 mm - Renault, Colorale, Goélette, R2087, Frégate, SG2, etc).Mounts on engine 668 - 11cv - 2L, 671 - 12cv - 2.2 L and Super Etendard ...
€540.00 TTC
(450,00 € HT)
(450,00 € HT)
Cylinder head gasket 817 - Renault TP3 SG2
" Cylinder head gasket for Renault type 817 engine "
€96.00 TTC
(96,00 € HT)
(96,00 € HT)
Ignition head SEV 58 mm
Head for SEV igniter: Interlocking inside the igniterØ socket 58 mm
€36.00 TTC
(30,00 € HT)
(30,00 € HT)
160 mm float fuel gauge - 6V
" Float fuel gauge. Adaptable model. Arm length approx. 160 mm. External diameter of plate 54 mm - fixing center distance 38 mm. Supplied with cork seal. 3-hole fixing. Internal resistance approx. 110 ohms. For 6-volt vehicle only. "
€48.00 TTC
(40,00 € HT)
(40,00 € HT)
Oil pressure switch - Fregate Prairie Goelette R2087
Oil pressure switch for Renault Fregate, Colorale, Prairie (side engine 603 and tumbled 668 or 671), R2087, Goelette, Galion, SG2 petrol engine (engine 671 or 817). Thread 14x150.
€10.44 TTC
(8,70 € HT)
(8,70 € HT)
Stainless steel - cylinder head water tube - Renault Fregate, Prairie, R2087, Goelette
" Internal water pipe for cylinder head. Engine type 668, 671 (11 and 12hp), 817 (sg2 petrol) etc. Manufactured in stainless steel to eliminate corrossion problems. Supplied with assembly diagram. "
€39.90 TTC
(33,25 € HT)
(33,25 € HT)
IGOL 20W50 mineral oil - 5L can
5 l can (non contractual photo) - Viscosity: 20W-50BenefitsHéRITAGE GTZ mineral oil.Multigrade lubricant for Gasoline and Diesel engines, made from severely refined mineral bases and additives suitable for older engines. The anti-wear additive ...
€36.00 TTC
(30,00 € HT)
(30,00 € HT)
Renault Prairie Colorale transfer case bearing kit
Bearing kit for the reconditioning of Renault 4x4 Prairie Colorale, R2087 and derivative 4WD transfer boxes.The kit contains 6 bearings for the 3 internal shafts. It is important to replace the 3 waterproof rings sold on this store.(No ...
€384.30 TTC
(320,25 € HT)
(320,25 € HT)
Ignition coil 12v standard
Ignition coil guaranteed for use with a 12 V platinum screw igniter (breakers). Impedance respected to prevent the breakers from bluing.Works perfectly also with electronic module or integral electronic igniter. (Non contractual photo)
€54.60 TTC
(45,50 € HT)
(45,50 € HT)
Engine belt 603 LATERAL 85 Renault Prairie Goelette first generation
Belt for Renault type 603 engine (Colorale, Goélette, 1st generation etc)Assembly with cast iron water pump pulley and dynamo on the breather side
€30.00 TTC
(25,00 € HT)
(25,00 € HT)
Renault Frégate type engine tappet cover gasket
Housing gasket (fuel pump side) in cork for for Renault Frégate, Prairie, Colorale, R2087, Goélette and derivatives
€18.00 TTC
(15,00 € HT)
(15,00 € HT)
Aluminum timing gear - Renault Fregate Goelette Prairie Galion
50-tooth aluminum timing pinion for Renault 668,671 and 817 engines, Frégate 11 and 12cv, Prairie 11cv, Goélette, Galion, R2087, Sg2 gasoline, and derivatives.Not suitable for 14hp - 603 ("85 lateral") engines; nor to diesels.
€123.00 TTC
(102,50 € HT)
(102,50 € HT)
Clutch mechanism 3 fingers 10L22 - Renault Prairie Goelette
Clutch mechanism reconditioned, in standard exchange. Fitted on Renault Colorale, Prairie, Goélette, Galion, R2087 and derivativesComplete disassembly, micro balling, surfacing and retaring of the pressure plate.(The sending is done after receipt ...
€504.00 TTC
(420,00 € HT)
(420,00 € HT)
Exhaust support strap reinforces 90 mm
Suspension strap for exhaust. Robust construction, reinforced rubber, metal eyelets.92 mm center distance for M8 mm screws.
€13.48 TTC
(13,48 € HT)
(13,48 € HT)
603 cylinder head gasket Renault side engine 85
Head gasket - Renault lateral 85 - 603. 195 x 480 mmPlease note that there are several versions depending on the type of 603. Check the shape with the photo and in particular the igniter passage hole located at the edge of half of the long length.
€162.00 TTC
(135,00 € HT)
(135,00 € HT)
