Support de manomètre
Support métalique, laqué noir pour manomètre standard D52 mm. Prêt à fixé.
€9.53 TTC
(7,94 € HT)
(7,94 € HT)
Standard 6V coil ignition
Branded ignition coil guaranteed for use with 6 V platinum-plated igniter (breakers). Impedance respected to prevent the breakers from becoming blue. Also works perfectly with electronic module or integral electronic igniter.
€43.20 TTC
(36,00 € HT)
(36,00 € HT)
Support between engine-gearbox - RenaultFrégate
Support between engine and gearbox for Renault Frégate. Mounts at the level of the apron. (1 only per vehicle)
€48.00 TTC
(40,00 € HT)
(40,00 € HT)
STD segment set 85 mm 3x3x3x4.5 Renault Fregate
Set of 16 segments for 4 eyebolts dimension 85 mm - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 3 mm1 x scraper in 4.5 mmPossibility of ordering in 85 mm (call us)
€149.82 TTC
(124,85 € HT)
(124,85 € HT)
Gasket for cylinder head Renault Frégate
gasket for cylinder head pipe on renault fregate engine or similar
€7.20 TTC
(6,00 € HT)
(6,00 € HT)
Plugs x 2 for Renault block oil channel 668 and 671
Set of 2 aluminum plugs d14 mm for Renault type 668 and 671 engine (Colorale, Goélette, R2087, Frégate, etc)If protruding, after assembly, file the head (distribution plate side)
€22.49 TTC
(18,74 € HT)
(18,74 € HT)
Base gasket - set of 4 - Ø 91 mm - 1.10 MM - Renault Fregate etc
Set of 4 base gaskets (sleeve Ø 91mm) all copper 1.10 mm thick (approximately) for Renault type 671 engine (Colorale, Goélette, R2087, Frégate, etc.)
€54.00 TTC
(45,00 € HT)
(45,00 € HT)
Aviation collex type paste gasket for cylinder head - 450ml
Sealing paste to be applied on both sides of a cylinder head gasket. Product similar to "Collex". Leave to evaporate for about 30 min at room temperature after application, then fit the gasket - improves the seal - recommended with solid copper ...
€42.00 TTC
(35,00 € HT)
(35,00 € HT)
Cylinder head gasket 817 - Renault TP3 SG2
" Cylinder head gasket for Renault type 817 engine "
€96.00 TTC
(96,00 € HT)
(96,00 € HT)
Turbine water pump 60 mm - pulley 112mm - Renault Fregate, Prairie, Goelette, R2087, ...
Water pump complete with Ø 112 pulley for 17mm belt - is mounted on tumbled engine 668 or 671 Renault Frégate, Prairie, Colorale, R2087, Goélette, Galion, SG2 12cv, and derivatives. Ø 60 mm (cannot be mounted on type 817 - 2.6L engine). The pump ...
€240.00 TTC
(240,00 € HT)
(240,00 € HT)
Oil pan gasket Renault Fregate - Renault engine type 668 and 671
" Oil pan gasket for Renault type 668 and 671 engines (Colorale, Goélette, R2087, Frégate, etc)
€18.00 TTC
(15,00 € HT)
(15,00 € HT)
Clutch thrust bearing Renault Frégate
Graphite stopper for clutch mechanism.
€53.99 TTC
(44,99 € HT)
(44,99 € HT)
Stainless steel - cylinder head water tube - Renault Fregate, Prairie, R2087, Goelette
" Internal water pipe for cylinder head. Engine type 668, 671 (11 and 12hp), 817 (sg2 petrol) etc. Manufactured in stainless steel to eliminate corrossion problems. Supplied with assembly diagram. "
€39.90 TTC
(33,25 € HT)
(33,25 € HT)
Clutch disc 215mm - Renault Fregate Transfluide
Clutch disc reconditioned, in exchange Renault Frégate Transfluide (or Manoir). Complete disassembly, relining, micro balling and painting.The sending is done after receipt of the used mechanism, not destroyed(Depending on the year, ...
€113.40 TTC
(94,50 € HT)
(94,50 € HT)
Carburetor similar to the Solex 32 PBIC type
New carburettor similar to the Solex 32 PBIC model with accelerator pump. Vacuum outlet on foot base. Depending on the vehicle model, you will need to reset the configuration with the old starter, jets, cap or cover and throttle control
€195.68 TTC
(163,07 € HT)
(163,07 € HT)
