Brake reservoir with rubber
Translucent tank, delivered with bracket; rubber plug and fitting.
€38.40 TTC
(32,00 € HT)
(32,00 € HT)
3/8 - 24 f copper pipe fitting
Rigid brake line nut. 3/8 x 24 threads / inch. Tube Ø 4.75 mm
€7.80 TTC
(6,50 € HT)
(6,50 € HT)
Adapter connection 7/16 UNF female - 1/2 UNF male
Adapter connection 1/2 UNF male - 7/16 UNF female
€12.60 TTC
(10,50 € HT)
(10,50 € HT)
Rear brake cylinder 34.9mm - SUMB Marmon
For Simca SUMB Marmon and other heavy-duty derivatives.Complete rear wheel cylinder 1'3 / 8 (34.93 mm).
€144.00 TTC
(120,00 € HT)
(120,00 € HT)
Metal insert tip for jar
Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.
€10.80 TTC
(9,00 € HT)
(9,00 € HT)
Set of 4 SUMB Marmon brake shoes
" Set of 4 relined brake shoes, in standard exchange. (Send us your set before shipment of the new one) High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes. (non ...
€232.20 TTC
(193,50 € HT)
(193,50 € HT)
SUMB Marmon master cylinder plug kit
For Simca Sumb Mamon, Citroën U23 and other heavy goods vehicles.Kit of 3 caps + 3 copper gaskets for master cylinder.Depending on the model, order the set of 3 plugs + gaskets to close the unnecessary outlets.
€24.31 TTC
(20,26 € HT)
(20,26 € HT)
Flexible de embrayage 300 mm SUMB Marmon
Brake hose Length 300 mm. Entry 7/16 e 16 f / p for SUMB Marmon. Please check the correspondence with your model before ordering.Outside diam: 15.6 mmInternal diam: 10mmFor other models, please call us
€43.20 TTC
(36,00 € HT)
(36,00 € HT)
Pipe Ø 8 mm from reservoir to master cylinder - 1 m
Brake line remanufactured upon request, exclusively in 8 mm diameter copper.Photo not contractually binding. Supplied WITHOUT fittings - you can order the one you need from our store (for the master cylinder side). The other end is bare (inlet on ...
€50.40 TTC
(42,00 € HT)
(42,00 € HT)
Special brake grease tube - Plastilub ATE - 75 ml
Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!
€13.80 TTC
(11,50 € HT)
(11,50 € HT)
Brake line - from 100 to 150 cm
" Brake line remanufactured on request, only in copper diameter 6.35 mm. . Provide model (length and 2 original end caps) Shipment after receipt of your model. "
€62.04 TTC
(51,70 € HT)
(51,70 € HT)
Banjo adapter for SUMB Marmon master cylinder
Adapter for connecting the inlet of an 18 mm master cylinder to the original tube that goes to the jar. When the old models are in diam. 22mm, the adapter is essential to connect the tube from the jar.The set consists of: 2 copper gaskets, a ...
€50.40 TTC
(42,00 € HT)
(42,00 € HT)
Adapter connection 7/16 male - 1/2 female
Adaptateur freinage mâle 7/16 (envion 11mm)femelle 11/16 pour recevoir gros flexible (17mm mâle
€18.00 TTC
(15,00 € HT)
(15,00 € HT)
