Brake line - from 100 to 150 cm
" Brake line remanufactured on request, only in copper diameter 6.35 mm. . Provide model (length and 2 original end caps) Shipment after receipt of your model. "
€62.04 TTC
(51,70 € HT)
(51,70 € HT)
Brake reservoir with nipple + contact
Brake fluid reservoir, translucent plastic.With plug, fixing bracket and electrical contact for minimum liquid level
€48.00 TTC
(40,00 € HT)
(40,00 € HT)
Pipe Ø 8 mm from reservoir to master cylinder - 1 m
Brake line remanufactured upon request, exclusively in 8 mm diameter copper.Photo not contractually binding. Supplied WITHOUT fittings - you can order the one you need from our store (for the master cylinder side). The other end is bare (inlet on ...
€50.40 TTC
(42,00 € HT)
(42,00 € HT)
Adapter connection 1/2 UNF female - 3/8 UNF male
Braking adapter 1 / 2-20 UNF female by 3/8 24 male threads
€11.88 TTC
(9,90 € HT)
(9,90 € HT)
Adapter connection 7/16 male - 1/2 female
Adaptateur freinage mâle 7/16 (envion 11mm)femelle 11/16 pour recevoir gros flexible (17mm mâle
€18.00 TTC
(15,00 € HT)
(15,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
€11.40 TTC
(9,50 € HT)
(9,50 € HT)
Copper pipe fitting 7/16 - ext thread 11mm
Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm
€6.36 TTC
(5,30 € HT)
(5,30 € HT)
Special brake grease tube - Plastilub ATE - 75 ml
Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!
€13.80 TTC
(11,50 € HT)
(11,50 € HT)
Set of 4 SUMB Marmon brake shoes
" Set of 4 relined brake shoes, in standard exchange. (Send us your set before shipment of the new one) High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes. (non ...
€232.20 TTC
(193,50 € HT)
(193,50 € HT)
Brake line - from 51 to 99 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Large model, length from 50 cm, max 2m. Provide model (length and 2 original tips)Shipping after receiving your model.
€54.84 TTC
(45,70 € HT)
(45,70 € HT)
Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone
Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone
€18.00 TTC
(15,00 € HT)
(15,00 € HT)
Raccord adaptateur 1/2 UNF mâle - 3/8 UNF femelle
Adaptateur freinage 1/2-20 UNF mâle par 3/8 24 filets femelle
€12.60 TTC
(10,50 € HT)
(10,50 € HT)
Flexible de embrayage 300 mm SUMB Marmon
Brake hose Length 300 mm. Entry 7/16 e 16 f / p for SUMB Marmon. Please check the correspondence with your model before ordering.Outside diam: 15.6 mmInternal diam: 10mmFor other models, please call us
€43.20 TTC
(36,00 € HT)
(36,00 € HT)
Silicone brake fluid DOT 5 - 1L
" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "
€53.95 TTC
(44,96 € HT)
(44,96 € HT)
Viewed products
Front brake cylinder Left or Right 31.7 mm - Citroen Traction
" Left or Right front wheel cylinder with bleeder. For Traction 7 and 11 hp. "
€60.00 TTC
(50,00 € HT)
(50,00 € HT)
Set of 4 relined rear brake shoes - FIAT 508 Ballila
Set of 4 relined brake shoes (AR) for Fiat ballila in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of worn parts.
€89.10 TTC
(74,25 € HT)
(74,25 € HT)
Segment set Ø 66.04 mm Simca Chambord 2.38x2.38x5x5 - 8cyl
Segment set Ø 66.04 mm Simca 2.38x2.38x5x5 - 8cyl
€256.80 TTC
(214,00 € HT)
(214,00 € HT)
Rear brake cylinder rebuild kit 25.4 mm -Peugeot 203
Repair kit for 1 rear wheel cylinder 25.4 mm. Supplied with pistons and spring.For all models.
€26.22 TTC
(21,85 € HT)
(21,85 € HT)
Ignition Set of 4 Citroen Traction U23 HY spark plugs
Set of 4 NGK standard base spark plugs (14mm), Citroen U23, Traction, HY, type H engine. Compatible with SP95 and SP98 fuels.
€24.00 TTC
(20,00 € HT)
(20,00 € HT)
Fuel pump - angled outputs - Citroen type Traction - U23 - HY
Fuel pump with primer, for Citroën Traction, delivered with gasket. Can also be mounted on U23 gasoline engine, HY, type H, and HZ equipped with the engine type Traction.
€36.00 TTC
(30,00 € HT)
(30,00 € HT)
Front wheel cylinder DYna Z Panhard - 1954 until June 1958 - d 31.75 mm
Rear wheel cylinder Dyna Z Panhard - May 1955 to June 1958 - d 22 mm
€70.80 TTC
(59,00 € HT)
(59,00 € HT)
Kit 3 camshaft bushes x 3 - Simca Versailles Chambord - Aquilon engine
Set of 3 camshaft bushes standard dimension for Aquilon Simca Versailles Chambord engine. Delivered with the tool.
€311.00 TTC
(311,00 € HT)
(311,00 € HT)
