Renault Fregate front cylinder head gasket
cylinder head plate gasket for renault fregate engine or similar.Model for distribution side.
€5.00 TTC
(5,00 € HT)
(5,00 € HT)
160 mm float fuel gauge - 6V
" Float fuel gauge. Adaptable model. Arm length approx. 160 mm. External diameter of plate 54 mm - fixing center distance 38 mm. Supplied with cork seal. 3-hole fixing. Internal resistance approx. 110 ohms. For 6-volt vehicle only. "
€40.00 TTC
(40,00 € HT)
(40,00 € HT)
Valve stem seals x 8 - Renault fregate Goelette Prairie
8 valve stem seals for Renault gasoline engine 668, 671, 817 mounted on Frégate, Prairie, R2087, Sg2, Goélette and derivatives
€37.50 TTC
(37,50 € HT)
(37,50 € HT)
Reinforced collar for exhaust - Ø 44-47 mm
Reinforced collar for exhaust - Ø 44-47 mmRobust French manufacturing
€4.83 TTC
(4,83 € HT)
(4,83 € HT)
Oil breather plug - Renault Goelette R2087 Fregate Prairie
Oil breather plug - Renault Goelette R2087 Fregate PrairieDelivered with seal - original Renault product
€32.00 TTC
(32,00 € HT)
(32,00 € HT)
Valve guides x 4 ADM ECH - 9x61x 15.14 ORIGIN - Renault Fregate - Prairie - Goelette - R2087 - SG2
Set of 4 valve guides (cast iron) dimensions approx. 61 x Ø 15.14 - Ø int 9 mm - ADM and ECH - Fitting on gasoline engine 668 - 671 - 817 Renault. Suitable for cylinder heads fitted with 2 rocker arms separated by the central greasing tee.French ...
€58.20 TTC
(58,20 € HT)
(58,20 € HT)
Thermostatic spring on Renault Prairie manifold
Thermostatic spring to be mounted on the exhaust manifold. For Renault Frégate, R2087; Goélette, Colorale, Prairie and derivatives etc.
€38.33 TTC
(38,33 € HT)
(38,33 € HT)
Renault Goelette Fregate bearings, dimension 0.25 - 55.75 mm
Set of 6 bearing shells, dimension 0.25, 55.75 mm trunnion, Renault type 668 - 671 engine (Colorale, Goélette, R2087, Frégate, etc.)668 and 671 engine and Super Etendard 817 - 2.6 L
€316.00 TTC
(316,00 € HT)
(316,00 € HT)
Ford RAL 5005 blue engine paint - 500 ml
Ford RAL 5005 blue engine paint - 500 ml jarSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated with ...
€34.00 TTC
(34,00 € HT)
(34,00 € HT)
Pistons linerss kit - 91 mm base - Renault Prairie Goelette 668
" Kit 4 liners / pistons for Renault type 668 engine (Colorale, Goélette, Frégate, etc) Standard engine, 11hp. Bore 85 base 91mm. Composed of 4 pistons with segments, pins and circlips, 4 liners. New period stock. NON-contractual PHOTO. "
€249.58 TTC
(249,58 € HT)
(249,58 € HT)
Stainless steel - cylinder head water tube - Renault Fregate, Prairie, R2087, Goelette
" Internal water pipe for cylinder head. Engine type 668, 671 (11 and 12hp), 817 (sg2 petrol) etc. Manufactured in stainless steel to eliminate corrossion problems. Supplied with assembly diagram. "
€33.25 TTC
(33,25 € HT)
(33,25 € HT)
Rod bearings Renault Goelette Fregate side STD - 55 mm
Set of 8 connecting rod bearings, STD dimension crank pin d 55 mm - Renault, Colorale, Goélette, R2087, Frégate, Sg2, etc). Mounts on 668 - 11cv - 2L, 671 - 12cv - 2.2 L and super Etendard 817 - 2.6 L engine
€290.00 TTC
(290,00 € HT)
(290,00 € HT)
Oil pan gasket Renault Fregate - Renault engine type 668 and 671- original stock
" Oil pan gasket for Renault type 668 and 671 engines (Colorale, Goélette, R2087, Frégate, etc) Please note: as the cork is old, it should be soaked in water before use so that it regains its waterproof properties.
€10.00 TTC
(10,00 € HT)
(10,00 € HT)
Battery switch - safety
Battery isolator - used to electrically isolate the battery. To be placed on a terminal of the battery.
€10.00 TTC
(10,00 € HT)
(10,00 € HT)
Segment set STD 88mm 3x3x3x4.5 Renault Fregate
Set of 16 segments for 4 eyebolts dimension 88 mm - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 3 mm1 x scraper in 4.5 mmPossibility of ordering in 85 mm (call us)
€130.00 TTC
(130,00 € HT)
(130,00 € HT)
Bearing 6203 - 17x40x12
Bearing - 17x40x12 waterproof (often used on dynamo, water pump, flywheel center, etc.). Check with the dimensions of your bearing.
€9.00 TTC
(9,00 € HT)
(9,00 € HT)
