Fuel hose diam 8 mm - by the meter

8 mm fuel hose sold by the meter.

Reinforced collar for exhaust - Ø 44-47 mm

Reinforced collar for exhaust - Ø 44-47 mmRobust French manufacturing

Segment set Simca 5 - 52.50 mm 2x2x2x3

Set of 16 segments (4 per piston) - Cylinder bore 52.50 mmComposition:12 waterproof segments, 2 mm high4 scraper segments 3mm high. Non contractual photo.Other dimensions available, contact us to define the height of each segment.

Pressure hose for igniter Ø 5.5 mm - by the meter

Hose to connect the igniter / carburetor depression 5.5 mm sold by the meter.

rubber fuel gauge seal - 3-hole

Rubber seal for 3-hole fuel gauge

Temperature manometer with probe - ivory background

Mano "OS" temperature indicator (without electrical connection). Direct reading by probe mounted on a radiator hose (high outlet). 52 mm recess on the pressure gauge side.Capillary 1m80. Delivered with lighting and probe for the hose.

Fuel gauge - replacement plastic float

White plastic float. Used to replace ring gauge floats.

Exhaust manifold paint - 250 ml

€48.00 TTC
(40,00 € HT)

Fuel needle - Solex 32 PBIC carburettor or similar

Fuel needle - Solex 32 PBIC carburettor or similar

Segment set Simca 5 - 52 mm - 2x2x3x3

Set of 16 segments (4 per piston).Composition:Cylinder bore 52 mm8 waterproof segments, 2 mm high8 scraper segment height 3mmOther dimensions available, contact us.

Segment set Simca 5 - 53 mm 2x2x2x3

Set of 16 segments (4 per piston).Composition:Cylinder bore 53.00 mm12 waterproof segments, 2 mm high4 scraper segment height 3mmOther dimensions available, contact us.

Calibrouge (Plastigage) mechanical clearance measurement

"Plastigage"The Calibrouge ("plastigage or plastigauge") is a simple and practical tool for measuring the clearances of your bearings. Range of use: operating clearance from 0.025 to 0.175 mm

Manometer Tachometer - 2 - 4 - 6 - 8 cyl - electric 12V - black background - for negative to mass

Mano "OS" Tachometer 0 to 5000 rpm for 4-cylinder petrol engine. Connects to the "break" terminal on the ignition coil. 52 mm recess on the pressure gauge side. delivered with lighting. for negative to ground

Battery switch - safety

Battery isolator - used to electrically isolate the battery. To be placed on a terminal of the battery.

Gauge Gasket cork 3 holes

Cork gasket for 3-hole fuel gauge

Universal bearing grease

For greasing bearings - Water resistant