Calibrouge (Plastigage) mechanical clearance measurement
"Plastigage"The Calibrouge ("plastigage or plastigauge") is a simple and practical tool for measuring the clearances of your bearings. Range of use: operating clearance from 0.025 to 0.175 mm
€27.00 TTC
(22,50 € HT)
(22,50 € HT)
Aviation collex type paste gasket for cylinder head - 450ml
Sealing paste to be applied on both sides of a cylinder head gasket. Product similar to "Collex". Leave to evaporate for about 30 min at room temperature after application, then fit the gasket - improves the seal - recommended with solid copper ...
€42.00 TTC
(35,00 € HT)
(35,00 € HT)
Valves x 4 - ECH Ø 20.5x6x88 - plate 45 ° - Simca 5 - Fiat 500A
Set of 4 ECH valves Ø 20.5x6x88 - plate 45 ° - Simca 5 - Fiat 500A
€108.86 TTC
(90,72 € HT)
(90,72 € HT)
Pistons complets - jeu de 4 - Ø 54.00 mm - Simca 5
Set of 4 piston Ø 54.00 mm - Simca 5.
€648.00 TTC
(540,00 € HT)
(540,00 € HT)
Reinforced collar for exhaust - Ø 44-47 mm
Reinforced collar for exhaust - Ø 44-47 mmRobust French manufacturing
€5.80 TTC
(4,83 € HT)
(4,83 € HT)
Segment set Simca 5 - 52 mm - 2.5x2x2x3
Set of 16 segments (4 per piston).Other dimensions available, contact us.
€170.00 TTC
(141,67 € HT)
(141,67 € HT)
Mechanism clutch Simca 5
Clutch mechanism reconditioned, in standard exchange. Mounted on Simca 5, etc ...Complete disassembly, micro balling, surfacing and retaring of the pressure plate.(The sending is done after receipt of the used mechanism, not destroyed - Depending ...
€276.00 TTC
(230,00 € HT)
(230,00 € HT)
Battery switch - safety
Battery isolator - used to electrically isolate the battery. To be placed on a terminal of the battery.
€12.00 TTC
(10,00 € HT)
(10,00 € HT)
Segment set Simca 5 - 52 mm (4 sealed / 1 scraper)
Set of 20 segments (5 per piston).Composition:Cylinder bore 52.50 mm16 waterproof segments, 2 mm high4 scraper segment height 3mmOther dimensions available, contact us.
€189.60 TTC
(158,00 € HT)
(158,00 € HT)
Fuel needle - Solex 32 PBIC carburettor or similar
Fuel needle - Solex 32 PBIC carburettor or similar
€11.88 TTC
(9,90 € HT)
(9,90 € HT)
Fuel gauge - replacement float
Float in synthetic material resistant to current fuels. Used to replace the cork floats on the fuel gauge Length: 1.40" Diameter: 1.14"
€17.72 TTC
(17,72 € HT)
(17,72 € HT)
Engine red paint - 500 ml -
Engine red paint -Pot of 500 mlSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated with our Phosprim ...
€40.80 TTC
(34,00 € HT)
(34,00 € HT)
Pressure hose for igniter Ø 5.5 mm - by the meter
Hose to connect the igniter / carburetor depression 5.5 mm sold by the meter.
€10.20 TTC
(8,50 € HT)
(8,50 € HT)
Manometer Tachometer - 2 - 4 - 6 - 8 cyl - electric 12V - ivory background - for negative to mass
Mano "OS" Tachometer 0 to 5000 rpm for 4-cylinder petrol engine. Connects to the "break" terminal on the ignition coil. 52 mm recess on the pressure gauge side. delivered with lighting. for negative to ground
€69.95 TTC
(58,29 € HT)
(58,29 € HT)
Segment set Ø 52 mm - Simca 5 - 2x2x2x3 - 4cyl
Segment set Ø 52 for Simca 5Cutting clearance to be adjusted before assembly. Non-contractual photo - no return or refund possible.
€158.64 TTC
(132,20 € HT)
(132,20 € HT)
