Master cylinder kit 38.1 mm - Renault Galion
Repair kit for 38.1 mm master cylinder.
(74,75 € HT)
Brake cylinder 28.5mm - entry 11mm (7/16th) - Peugeot Q3A
Brake cylinder 28.5mm - entry 11mm (7/16th) -
(65,00 € HT)
Remise en état lot de pièces spécifiques
(90,00 € HT)
segment set 85 mm 2x2x2x4x4 Renault Fregate
Set of 20 segments for 4 eyebolts dimension 85 mm - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 2 mm2 x scraper in 4 mmPossibility of ordering in 85 mm (call us)
(138,00 € HT)
copy of Oil pressure contact mano - Ford Vedette 1949 - 54
oil pressure switch for Ford Vedette engine from 1949 to 1954 - Thread M 10x100
(10,50 € HT)
Rear brake cylinder 19mm - 3/8 Panhard 24 - 07/1964 to end
Rear wheel cylinder 19mm - Panhard 24 équipé frein à tambours - 07/1964 à fin de série
(57,60 € HT)
Brake hose front and rear 378 mm Simca Aronde feb/1956 to nov/1957
Brake hose front and rear 378 mm Simca Aronde feb/1956 to nov/1957
(26,00 € HT)
copy of Set of segments STD 85.50, oversize 0.50 mm Renault Fregate
Set of 16 segments for 4 pistons, special dimension 85.50 mm reaming - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 3 mm2 x scraper in 4.5 mmPossibility of ordering in 85 mm (call us)
(138,00 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Best sellers There are 1556 products.
valves x 4 - Ø32x8x105 - intake - Simca 8 - 1200
valves x 4 - Ø32x8x105 - intake - Simca 8 - 1200
(155,00 € HT)
Valves x 6 - ADM 30° Ø 37x9x138 - Citroen P34 P36 10cv
Set of 6 ADM valves 30 ° - Ø 37x9x138 - Citroen P34 P36 10cv
(154,52 € HT)
various port
(25,00 € HT)
various repairs
(100,00 € HT)
various works
(3,87 € HT)
VM 203 occasion
(302,00 € HT)
Water plate gasket for Simca Versailles Chambord
Plate seal behind the timing cover
(8,30 € HT)
Water pump - 1 outlet - Renault 4cv - Dauphine
Water pump - 1 outlet - Renault 4cv - Dauphine
(228,00 € HT)
Water pump - Spare shaft 15x158 mm - Citroen HY from 63 to end
Shaft for water pump 15 x 158mm - CItroen HY from 63 to end
(43,75 € HT)
Water pump - the seal - Citroën Traction
Gasket for water pump - Impeller Ø 80mm - Citroen Traction
(10,00 € HT)
Water pump -Citroen HY before 1964
Water pump - Citroen HY with Traction engine - before 1964. Length of the cast iron body 120 mm excluding the axis protrusionIn standard exchange - The pump must be complete and not destroyed.
(310,00 € HT)
Water pump 4 outlets - Renault Dauphine
Water pump 4 outlets - Renault DauphineDelivered with the pulley with 4 fixing
(260,00 € HT)
Water pump axis 15 non-declutchable pulley - Peugeot 203/403
Water pump axis 15 non-declutchable pulley - Peugeot 203/403
(322,50 € HT)
Water pump belt - Citroen Traction - U23 - HY before 04/63
Main belt connecting the water pumps-crankshaft-fan: for Citroen with "Traction" type engine
(25,00 € HT)
Water pump belt - Citroen U23
Main belt connecting the water pumps-crankshaft-fan: for Citroen U23 with "Traction" type engine
(25,00 € HT)
Water pump for pulley with 4 fixing screws - Simca Aronde P60 Ariane
Water pump for pulley with 4 fixing screws - Simca Aronde P60 Ariane Flas or RushDelivered with the 2 gaskets
(217,50 € HT)
Water pump for pulley with central nut + pin - Simca Aronde P60 Ariane
Water pump for pulley with central nut + pin - Simca Aronde P60 Ariane
(217,50 € HT)
Water pump overhaul kit with turbine - Citroen HY
Water pump overhaul kit with turbine - Citroen HY
(82,00 € HT)
Water pump repair kit - Simca Versailles Chambord
Repair kit for water pump Simca Versailles, Chambord, Marly etc.Includes a bearing axle + sealing ring ("cyclam"). It is advisable to rectify the seat on the body (glass) before fitting a new rotating joint. Refer to the technical review for ...
(148,64 € HT)
Water pump repair kit with aluminum impeller - Ford Vedette
Repair kit for water pump for "Y" or "T" pump body - years 1949-54. New axle is 16mm instead of 12 mm. So you need to drill body 16.5 mm. We recommend correcting the seat of the rotating joint at the back of the body.
(151,20 € HT)
Water pump turbine - Simca Versailles Chambord
New aluminum impeller, machined in the mass, for water pump V8 Simca Versailles, Chambord, Aquilon type engine.Very neat French manufacture.
(141,20 € HT)
Waterproof bearing 15 x 42 for Citroen Traction HY U23 water pump
Sealed bearing 15x42 for Citroen Traction HY U23 water pump
(8,92 € HT)
Waterproof ring for Renault 4x4 Prairie transfer case - colorale - R2087
" Sealing ring (oil seal) for transfer case. diam 65 x 48 mm (shaft) 3 bushings per transfer case, sold individually. "
(14,07 € HT)
Waterproof ring for Renault Colorale R2087 Goelette bridge nose
" Waterproof ring (oil seal) for bridge nose for Renault Prairie, Goélette and derivatives. Mounts in the metal frame, in place of the old one. "
(16,80 € HT)
Waterproof ring nose bridge Renault R2087
Watertight ring (spinnaker) for bridge nose - size 50x80 to put back in the metal frame. Sold individually
(12,60 € HT)
Waterproof swivel joint - Cyclam for Citroen Traction HY U23 water pump
Waterproof rotating joint - Cyclam for CItroen Traction HY U23 water pump - for Ø 15 mm shaftAttention, check the possibility of mounting for an old pump fitted with a stuffing box
(22,30 € HT)
Wheel bearing 90 x 45 x 50 mm - front or rear hub - Citroen HY
Wheel bearing - front or rear hub - Citroen HY - quality manufacturing.90 x 45 x 50mm.
(125,91 € HT)
White-Gray gear lever knob for Simca Versailles et Beaulieu dashboard
Gear shift knob, in Simca Versailles and Beaulieu white-gray lacquered resin, with insert for thread, according to the original
(42,80 € HT)
Window cleaners int Simca Chambord
Set of 4 interior window wipers for Simca Chambord.Adaptable model. Reuse the metal strips to form the rounded parts.
(48,00 € HT)
Window slide set for 2 doors - citroen U23
Window slide set for 2 doors - citroen U23
(34,00 € HT)
Window slide set for 2 doors - Renault Goelette
Window slide set for 2 doors - Renault Goelette
(30,00 € HT)
windscreen (front) - Simca 9 Aronde
Windshield seal - Simca 9 Aronde(Does not fit P60)
(100,00 € HT)
Windscreen seal Ford Vedette 1949/52 - with central pillar
Welded windscreen seal - with central upright - for Vedette 1949 to 52. Photo no contractual
(170,00 € HT)
Windscreen seal Ford Vedette 1953/54
Welded windscreen seal - without central upright - for Vedette 1953 and 54. Non-contractual photo
(95,00 € HT)
Windscreen seal large model 63 and end of series - Citroen HY
Windscreen seal large model 63 and end of series - Citroen HY
(57,00 € HT)
Windscreen seal Renault Prairie Colorale Goélette Galion
Windscreen seal for Renault Prairie Colorale, Goélette, Galion, R2065, R2066 and derivatives. Length 4 ml, can be cut to the size of your model (with a cuter)
(95,00 € HT)
Windscreen seal Simca Chambord
Windscreen seal Simca Chambord, Beaulieu, Présidence, Marly 2
(180,00 € HT)
Windscreen seal Simca Versailles - Ariane
Windshield seal Simca Trianon Versailles Régence Ariane Marly 1
(170,00 € HT)
Windscreen seal small model - set of 2 - Debut a 63 - Citroen HY
Small windscreen seal - set of 2 - Start at 63 - Citroen HY
(65,00 € HT)
Windscreen wiper - adjustable arms x 2 - 5 mm axle
Stainless steel wiper arm. Adjustable length from 20 to 30 cm. Tightening on 5 mm axle - Sold by 2
(35,00 € HT)
Windscreen wiper - Stainless steel brushes x 2 - 260 mm
Stainless steel wiper blades. Length 260 mm. Sold by 2 Mounts with the adjustable arms on sale HERE
(26,16 € HT)
Windscreen wiper - Stainless steel brushes x2 - 220 mm
Stainless steel wiper blades. Length 220 mm. Sold by 2 Mounts with the adjustable arms on sale HERE
(25,50 € HT)
Windshield wiper - Stainless steel squeegee blades 230 mm x 2
Stainless steel wiper blades, 23 cm squeegee type. Mounts with the adjustable arms on sale HERE. Sold by 2 squeegees
(16,00 € HT)
Wiper - Stainless steel brushes x 2 - 285 mm
Stainless steel wiper blades. Length 285 mm. Sold by 2 Mounts with the adjustable arms on sale HERE
(29,45 € HT)
Wiper - Stainless steel squeegee blades 205 mm x 2
Stainless steel wiper blades, squeegee type 20.5 cm . Mounts with the adjustable arms on sale HERE
(15,00 € HT)
Wiper sole kit - Ford Vedette 1954
Kit semelle pour essuie glace Ford Vedette 1954 - Fabrication française soignée - Exclusivité techni-Tacot Comprend : 2 x semelles essuie glace
(11,90 € HT)
Wooden steps - pair - Renault Goelette R2087 Galion voltigeur
Set of 2 wooden steps - (left + right) - Quality manufacturing by carpenter - doweling and gluing - multi-layer varnishing - Ash wood- Renault Goelette 2087 Aerobatic galleon
(203,00 € HT)
Ø 16 mm purge te for heating or cooling circuit
Ø 16 mm purge te for heating or cooling circuit
(17,50 € HT)
Ø18mm stabilizer bar repair kit Simca Aronde
Ø18mm stabilizer bar repair kit Simca Aronde
(53,29 € HT)