Hose 7.5x13.5 - brake jar / master cylinder - 1ml - Synthetic liquid DOT 4
Hose sold by the meter for jar connection to master cylinder (7.5 mm plastic nipple connection) - 13.5 mm outsideDoes not withstand pressure. TYPE EPDM + textile reinforcement - intended only for synthetic fluid type DOT 4 - Not suitable for ...
€12.60 TTC
(10,50 € HT)
(10,50 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
€5.40 TTC
(4,50 € HT)
(4,50 € HT)
female female brake hose - 11.1 mm - 7/16 - Renault SG2
Female female brake hose - 520 mm - Renault SG2Vehicle with single circuit braking circuit: 3 MF hoses are requiredVehicle with dual circuit braking system: 3 MF hoses + 2 FF hoses are required
€32.40 TTC
(27,00 € HT)
(27,00 € HT)
Brake line - from 150 to 200 cm
Brake line re-manufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original end pieces)Shipping after receiving your model.
€69.24 TTC
(57,70 € HT)
(57,70 € HT)
Master cylinder inside piston 20mm - with brake assist - Renault Saviem Sg2
Single circuit master cylinder for SG2 Renault or Saviem from 1970 to end of series. Current product of French manufacture.
€154.80 TTC
(129,00 € HT)
(129,00 € HT)
Front brake cylinder from 1970 to the end - Renault SG2
Front brake cylinder for single circuit, from 1970 to end of series.
€96.00 TTC
(96,00 € HT)
(96,00 € HT)
Double circuit master cylinder Saviem Sg3 and derivatives
Double circuit master cylinder Saviem Sg3 and derivatives
€644.40 TTC
(537,00 € HT)
(537,00 € HT)
1/2 female 20 UNF connection on 8 mm tube (metal brake jar)
Metal tank foot nut (female 1/2 and d 8mm)
€11.10 TTC
(9,25 € HT)
(9,25 € HT)
Pipe Ø 8 mm from reservoir to master cylinder - 1 m
Brake line remanufactured upon request, exclusively in 8 mm diameter copper.Photo not contractually binding. Supplied WITHOUT fittings - you can order the one you need from our store (for the master cylinder side). The other end is bare (inlet on ...
€50.40 TTC
(42,00 € HT)
(42,00 € HT)
Metal insert tip for jar
Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.
€10.80 TTC
(9,00 € HT)
(9,00 € HT)
