modification cylindre avec piston alu creux 14mm
(20,00 € HT)
copy of Adapter connection 7/16 male - 1/2 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 11/16 pour recevoir gros flexible (17mm mâle
(14,20 € HT)
Adapter connection 7/16 male - 1/2 female
Adaptateur freinage mâle 7/16 (envion 11mm)femelle 11/16 pour recevoir gros flexible (17mm mâle
(15,00 € HT)
Clutch thrust ball bearing for 3-latch mechanism - Traction Citroen
Bearing for clutch release associated with the 3-latch mechanism and heavy plate.(Depending on year, non-contractual photo)
(75,00 € HT)
Plus value pour 4 pistons Rosengart sur mesure
(185,80 € HT)
copy of Waterproof swivel joint - Cyclam for Citroen Traction HY U23 water pump
Waterproof rotating joint - Cyclam for CItroen Traction HY U23 water pump - for Ø 15 mm shaftAttention, check the possibility of mounting for an old pump fitted with a stuffing box
(24,50 € HT)
Rack steering bellows - Citroen HY
Rack steering rubber boot - Citroen HYAny modelSold individually (2 per vehicle)
(18,73 € HT)
Brake pipe - from 300 to 350 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
(180,00 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Braking There are 39 products.
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Silicone brake fluid DOT 5 - 1L
" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "
(44,96 € HT)
Metal insert tip for jar
Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.
(8,85 € HT)
Copper pipe fitting 7/16 - ext thread 11mm
Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm
(5,20 € HT)
Special brake grease tube - 5g
Tube of special braking grease (5gr), Lockheed DOT and silicone compatible, protects steel cylinder and piston parts, helps them slide, compatible with rubber parts.
(3,89 € HT)
Front brake hose 349 mm Simca Versailles Chambord Ariane
Front brake hose 349 mm long. (The vehicle has 2 front hoses) For Simca V8, Versailles, Regence, Chambord, Présidence, Trianon, Marly, Ariane 4 and Ariane 8, etc.
(26,00 € HT)
Brake switch - stop - DOT 3 and 4
" Brake switch. STOP light function - compatible with synthetic liquid type" "lockheed" "Dot 3 and 4. If using 100% silicone liquid: Choose this other reference 1/2 - 20 thread / inch thread "
(15,83 € HT)
Brake switch - stop - special silicone
Brake switch. STOP light function. 100% silicone liquid and LHM compatible1/2 - 20 thread / inch thread
(15,83 € HT)
Special brake grease tube - Plastilub ATE - 75 ml
Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!
(11,50 € HT)
Rear brake cylinder 18.2 or 19 mm Simca Versailles
Rear wheel cylinder (19 mm piston) can be used to replace models with 18.2 mm piston. The assembly is done in place and allows optimal braking.
(62,40 € HT)
Flexible rear brake hose 349 mm Simca Versailles Chambord Ariane
Flexible rear brake hose 349 mm long. Male ext 9mm - female int Ø 8.3 mm. Don't forget to replace the copper gasket: click here a> (The vehicle has only 1 rear flexible) - Simca Beaulieu, Chambord, Présidence, Marly 2, Ariane 4 and ...
(26,00 € HT)
Front brake cylinder Ø25.4mm Simca Versailles
Front piston wheel cylinder 25.4mm
(72,80 € HT)
3/8 - 24 f copper pipe fitting
Rigid brake line nut. 3/8 x 24 threads / inch. Tube Ø 4.75 mm
(6,08 € HT)
Male thread brake reservoir
Brake fluid reservoir. Supplied with bracket, plug and 3/4 male connector 16 threads / p. External thread diameter = 18.5 mm. Delivered without caliper (fixing by the thread on the master cylinder). Lockeed and silicone compatible
(33,80 € HT)
Master cylinder 22mm Simca Versailles Chambord
Complete master cylinder D 22 mm. For Simca V8 (Versailles, Chambord, Marly, Ariane 4 and Ariane 8 etc.) before April 1960. Output 1/2 20f / p
(73,84 € HT)
1/2 female 20 UNF connection on 8 mm tube (metal brake jar)
Metal tank foot nut (female 1/2 and d 8mm)
(9,25 € HT)
Brake reservoir with nipple + contact
Brake fluid reservoir, translucent plastic.With plug, fixing bracket and electrical contact for minimum liquid level
(39,85 € HT)
Brake switch - STOP - 7 / 16-20f / p
Brake switch. STOP light function - Simca Beaulieu, Chambord, Présidence, Ariane 4 and Ariane 8.Generally mounted after April 1960.Thread 7/16 - 20 thread / inch
(22,50 € HT)
22mm master cylinder kit Simca Versailles Chambord
Complete overhaul kit for 22 mm master cylinder.
(26,00 € HT)
Front brake cylinder kit 25.4 mm Simca Versailles
Required for front brake cylinder 25.4 mm, with pistons.(for a cylinder)
(34,70 € HT)
Simca Versailles 19mm rear brake cylinder kit
Complete repair kit for rear wheel cylinder in 19 mm. Supplied with pistons.
(34,00 € HT)
Set of 4 relined front brake shoes from Simca Versailles
Set of 4 relined brake shoes (Front) for Simca V8 in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of worn parts.
(135,00 € HT)
Brake switch - STOP - silicone fluid - 7 / 16-20 th / inch
Brake switch for silicone fluid. STOP light function - Simca Aronde (depending on year) and P60Thread 7/16 - 20 thread / inch
(22,50 € HT)
Set of 4 relined rear brake shoes Simca Versailles
Set of 4 relined brake shoes (AR) for Simca V8 in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of worn parts.
(93,33 € HT)
Brake reservoir - male thread + electrical contact
Brake fluid reservoir, translucent plastic. With cap, mounting bracket and electrical contact for low fluid level
(39,50 € HT)
Master cylinder outlet connection with banjo
MASTER CYLINDER OUTLET CONNECTION WITH BANJOBolt M1 / 2 * 20F-F7 / 16 * 20FBanjo D15 F3 / 8 * 24F 84 °
(33,54 € HT)