modification cylindre avec piston alu creux 14mm
(20,00 € HT)
Adapter connection 7/16 male - 1/2 female
Adaptateur freinage mâle 7/16 (envion 11mm)femelle 11/16 pour recevoir gros flexible (17mm mâle
(15,00 € HT)
Clutch thrust ball bearing for 3-latch mechanism - Traction Citroen
Bearing for clutch release associated with the 3-latch mechanism and heavy plate.(Depending on year, non-contractual photo)
(75,00 € HT)
Plus value pour 4 pistons Rosengart sur mesure
(185,80 € HT)
copy of Waterproof swivel joint - Cyclam for Citroen Traction HY U23 water pump
Waterproof rotating joint - Cyclam for CItroen Traction HY U23 water pump - for Ø 15 mm shaftAttention, check the possibility of mounting for an old pump fitted with a stuffing box
(24,50 € HT)
Rack steering bellows - Citroen HY
Rack steering rubber boot - Citroen HYAny modelSold individually (2 per vehicle)
(18,73 € HT)
Brake pipe - from 300 to 350 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
(180,00 € HT)
Brake pipe - from 250 to 300 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
(155,00 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Segments There are 69 products.
Segment set Ø 74 mm Simca 2.5x2.5x2.5x5 - 4cyl
Segment set Ø 74 mm Simca 2.5x2.5x2.5x5 - 4cyl
(75,00 € HT)
Segment set STD 88mm 3x3x3x4.5 Renault Fregate
Set of 16 segments for 4 eyebolts dimension 88 mm - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 3 mm1 x scraper in 4.5 mmPossibility of ordering in 85 mm (call us)
(127,00 € HT)
Segment set Ø 66.04 mm Simca Chambord 2.38x2.38x5x5 - 8cyl
Segment set Ø 66.04 mm Simca 2.38x2.38x5x5 - 8cyl
(214,00 € HT)
STD segment set 85 mm 3x3x3x4.5 Renault Fregate
Set of 16 segments for 4 eyebolts dimension 85 mm - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 3 mm1 x scraper in 4.5 mmPossibility of ordering in 85 mm (call us)
(124,85 € HT)
Segment set Ø 72 mm Simca 2.5x2.5x2.5x5 - 4cyl
Segment set Ø 72 mm Simca 2.5x2.5x2.5x5 - 4cyl
(75,00 € HT)
Segments set Ø 72 mm Citroen Traction U23 HY 2x2.5x5 - 4cyl
Piston ring set Ø 72 mm Citroen Traction 2 x 2.5 x 5 - 4 cyl
(94,50 € HT)
piston ring set Ø 78 mm Citroen Traction U23 HY 2x2.5x5 - 4cyl
Segment set Ø 78 mm Citroen Traction 2x2.5x5 - 4cyl
(94,50 € HT)
Segment set Ø 72 mm Simca 2.5x2.5x2.5x4 - 4cyl
Segment set Ø 72 mm Simca 2.5x2.5x2.5x4 - 4cyl
(75,00 € HT)
Segment set Ø 80 mm Peugeot 403 - 2cx2x4.5x4.5
Segment set Ø 80 mm Peugeot 403 - 2cx2x4.5x4.5
(110,00 € HT)
Segment set Ø 66.04 mm Simca Chambord 2.38x2.38x5 - 8cyl
Segment set Ø 66.04 mm Simca 2.38x2.38x5 - 8cyl
(160,00 € HT)
Segment set Ø 75 mm Peugeot 203 403 - 7cv - 2.5x2.5x4.5
Segment set Ø 75 mm Peugeot 203 403 - 7cv - 2.5x2.5x4.5
(110,00 € HT)
Segment clearance Ø 72 mm - 2.5 x 2.5 x 2.5 x 5 - Simca 9 - Aronde
Set of 16 segments for 4 pistons dimension Ø 72 mm - Simca 9 or Aronde enginecomposition per plunger:4 x fire segment 2.5 mm4 x compression in 2.5 mm4 x compression in 2.5 mm4 x scraper in 5 mmPossibility to order in 85 mm (call us) - ...
(103,00 € HT)
Segment set Ø 66.50 mm Simca 2.38x2.38x5 - 8cyl
Segment set Ø 66.50 mm Simca 2.38x2.38x5 - 8cyl
(156,00 € HT)
Segment set Ø 75 mm Peugeot 203 403 - 7cv - 2x2x4.5
Segment set Ø 75 mm Peugeot 203 403 - 7cv - 2x2x4.5
(110,00 € HT)
Segment set 2 x 2 x 4.5 - STD 88 mm Renault R2087
Set of 12 segments for 4 pistons dimension 88 mm - 671 Renault petrol engine.composition per piston:2 x compression in 2 mm1 x scraper in 4.5 mmNon contractual photo
(115,85 € HT)
Piston ring set Ø 78 mm Citroen Traction U23 HY 2.5x2.5x4x4 - 4 cyl
Piston ring set Ø 78 mm Citroen Traction U23 HY 2.5x2.5x4x4 - 4 cyl
(99,00 € HT)
Segment set Simca 5 - 52.50 mm 2x2x2x3
Set of 16 segments (4 per piston) - Cylinder bore 52.50 mmComposition:12 waterproof segments, 2 mm high4 scraper segments 3mm high. Non contractual photo.Other dimensions available, contact us to define the height of each segment.
(132,20 € HT)
Segment set Ø 52 mm - Simca 6 - 2x2x2x3 - 4cyl
Segment set Ø 52 for Simca 6Cutting clearance to be adjusted before assembly. Non-contractual photo - no return or refund possible.
(110,00 € HT)
Segment set Ø 57.00 2x2x2x3 - Rosengart LR (set of 16)
Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 57.50.Please note: in the event of an error on your part, these products cannot be taken back.- 3 x compression h 2mm- 1 x scraper h 3 mmContact us for other ...
(199,17 € HT)
Segment clearance Ø 72 mm - 2.5 x 2.5 x 3 x 4 - Simca 9 - Aronde
Set of 16 segments for 4 pistons dimension Ø 72 mm - Simca 9 or Aronde enginecomposition per plunger:4 x fire segment 2.5 mm4 x compression in 2.5 mm4 x compression in 3 mm4 x scraper in 4 mmPossibility to order in 85 mm (call us) - ...
(103,00 € HT)
Set of segments Ø 69.50 mm - 3x2.5x2.5x4
Segment set Ø 69 mm to equip 4 pistons with 4 grooves:- 3x2.5x2.5x4Non contractual photo
(149,96 € HT)
Segment set Ø 56.50 2x2x2x4 - Rosengart LR (set of 16)
Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 56.50- 3 x high compression 2mm- 1 x high scraper 4 mmContact us for other dimensions.
(199,17 € HT)
Segment set Simca 5 - 53 mm 2x2x2x3
Set of 16 segments (4 per piston).Composition:Cylinder bore 53.00 mm12 waterproof segments, 2 mm high4 scraper segment height 3mmOther dimensions available, contact us.
(125,00 € HT)
Segment set Simca 5 - 52.50 mm 2x2x3x3
Set of 16 segments (4 per piston).Composition:Cylinder bore 52.50 mm8 waterproof segments, 2 mm high8 scraper segment height 3mmOther dimensions available, contact us.Contact us to define the height of each segment.
(125,00 € HT)
Ring set Ø 66.50 mm Simca 2.50x2.50x4 - 8cyl
Ring set Ø 66.50 mm Simca 2.50x2.50x4 - 8cyl
(156,00 € HT)
Segment set Ø 80 mm Peugeot 203 403 - 8cv - 2x2x4.5
Segment set Ø 80 mm Peugeot 203 403 - 8cv - 2x2x4.5
(121,00 € HT)
Segment set Ø 78 mm Citroen HY 2 x 2.5x4x4 - 4cyl
Segment set Ø 78 mm Citroen Traction 2.5x2.5x4x4 - 4cyl
(135,00 € HT)
Segment set Ø 52.4 mm Simca 6 - 2x2x2x3x2 - 4cyl
Segment set Ø 52.40 or 52.50 depending on availability.Cutting clearance to be adjusted before assembly. Non-contractual photo - no return or refund possible.
(117,00 € HT)
Segment set Simca 5 - 53.50 mm 2x2x2x3
Set of 16 segments (4 per piston).Composition:Cylinder bore 53.50 mm12 waterproof segments, 2 mm high4 scraper segments 3mm highOther dimensions available, contact us.
(125,00 € HT)
Segment set Simca 5 - 53.50 mm 2x2x2x2x3
Set of 20 segments (5 per piston).Composition:Cylinder bore 53.50 mm16 waterproof segments, 2 mm high4 scraper segment height 3mmOther dimensions available, contact us.
(160,10 € HT)
Segment set Ø 75 mm Peugeot 203 403 - 7cv - 2.5x2.5x2.5x4.5x4.5
Segment set Ø 75 mm Peugeot 203 403 - 7cv4 x sets each comprising 3 2.5 mm compression rings + 2 4.5 mm oil scraper rings.Non contractual photo
(150,00 € HT)
STD segment set 88mm Renault Fregate 3x3x4.5x4.5
Set of 16 segments for 4 pistons Ø 88 mm dimension - 668 or 671 Renault petrol engine.composition per piston:2 x compression in 3 mm2 x scraper in 4.5 mmPossibility of ordering in 85 mm (call us)
(127,00 € HT)
Segment set Ø 58.00 2x2x2x3.5 - Rosengart LR (set of 16)
Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 57.50. Be careful in the event of an error on your part, these products cannot be taken back.- 3 x compression h 2mm- 1 x scraper h 3.5 mmContact us for other ...
(199,17 € HT)
STD segment set 88mm Renault Fregate 2x2x2x4.5
Set of 16 segments for 4 pistons Ø 88 mm dimension - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 2 mm1 x scraper in 4.5 mmPossibility to order in 85 mm (contact us)
(124,85 € HT)
Segment set Ø 57.50 2x2x3.5x3.5 - Rosengart LR (set of 16)
" Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 and derivatives. Bore 57.50 - 2 x compression h 2mm - 2 x scraper h 3.5 mm Contact us for other dimensions. "
(199,17 € HT)
Jeu 12 segments compression ep 2.5mm + 4 racleur ep 4mm - D 70 mm
(91,00 € HT)
segment racleur 85 x 4,5 x 3,6 O23P
(35,00 € HT)
jeu 16 segments 68 mm x 2 x 2,8 C5P - segments avec ézaulement
(120,00 € HT)
Jeu de 16 segments Ø72.50 mm - 2.5 x 2.5 x 2.5 x 4
(141,58 € HT)
copy of Jeu de 3 Segment Ø 67.50 x 4.00 racleur 948 EX
(28,00 € HT)
copy of Segment set Ø 66.80 mm Simca Chambord 2.38x2.38x5 - 8cyl
Segment set Ø 66.80 mm Simca 2.38x2.38x5 - 8cyl
(248,00 € HT)
Set Segments Ø 58.00 2x2x3 - Rosengart LR (set of 12)
Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 58. Attention in case of error on your part, these products cannot be taken back.- 8 x compression h 2mm- 4 x scraper h 3 mmContact us for other sizes.
(150,98 € HT)
Segment set Ø 66.80 mm Simca Chambord 2.38x2.38x5 - 8cyl
Segment set Ø 66.80 mm Simca 2.38x2.38x5 - 8cyl
(182,00 € HT)
Segment set Ø 81.27 mm - 2.38 x 2.38 x 5 - SUMB MARMON
Segment set Ø 81.27 mm - 2.38 x 2.38 x 5 - SUMB MARMONor 24 segments in all. It is essential to check the cutting clearance.
(156,00 € HT)
Set Segments Ø 56.50 2.5x2.5xscraper 2.5xscraper .5 - Rosengart LR (set of 16)
Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 56.50- 4 x fire segment h 2.5mm- 4 x compression h 2.5mm- 8 x scraper h 2.5 mmPlease note that the scrapers are Ø 56.84 mm. Review the game at the cupContact us ...
(125,00 € HT)
Set of segments Ø 69 mm - 2.5x2.5x2.5x3.5
Segment set Ø 69 mm to equip 4 pistons with 4 grooves:- 2.5x2.5x2.5x3.5Non contractual photo
(156,30 € HT)
Jeu segm 66,04 x 5 x 2 T17 D5 - ref Gaillet
(50,00 € HT)
Segment set Ø 67.50 mm Simca Chambord 2 x 2 x 5 - 8cyl
Segment set Ø 67.50 mm Simca 2 x2 x 5 - 8cyl
(167,00 € HT)
Ring set Ø 67.50 mm Simca Chambord 2.38x2.38x5 - 8cyl
Ring set Ø 66.04 mm Simca 2.38x2.38x5 - 8cyl
(156,00 € HT)
Segment set Ø 65 mm Peugeot 201 - 2.5x2.5x2.5x2.5x2.5
Set of 20 segments Ø 65 for Peugeot 201: 2.5x2.5x2.5x2.5x3.5 Review the clearance in the cut BEFORE assemblyNon contractual photo
(120,20 € HT)
Segments set Ø 56.00 2.5x2x2.5x4 - Rosengart LR (set of 16)
Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 56.00Contact us for other dimensions.
(199,17 € HT)
Set of 20 segments Ø 68 mm - 2.5x2.5x2.5x5x5
Segment set Ø 68 mm to equip 4 pistons with 5 grooves:sets each comprising 3 compression segments 2.5 mm + 2 oil scraper segments 5 mm.Non contractual photo
(149,96 € HT)
Segment set Ø 74 mm Simca 2x2x5 - 4cyl
Segment set Ø 74 mm Simca 2x2x5 - 4cyl
(75,00 € HT)
Segment set Ø 81 mm - 2.38 x 2.38 x 5 - SUMB MARMON
Segment set Ø 81 mm - 2.38 x 2.38 x 5 - SUMB MARMONor 24 segments in all. It is essential to check the cutting clearance.
(156,00 € HT)
Segment set Ø 64.50 mm Peugeot 201 - 3x2.5x2.5x3.5x2.5
Set of 20 segments Ø 64.50 for Peugeot 201: 3x2.5x2.5x3.5x2.5Attention the 3rd position compression segment is delivered in Ø 65mm.Review the clearance in the cut BEFORE assemblyNon contractual photo
(120,20 € HT)
Segment set Ø 67.00 mm Simca Chambord 2.38x2.38x4 - 8cyl
Segment set Ø 67.00 mm Simca 2.38x2.38x4 - 8cyl
(156,00 € HT)
Segment set Ø 78 mm Citroen Traction U23 HY 3x3x3x4.5 - 4cyl
Segment set Ø 78 mm Citroen Traction 3x3x3x4.5 - 4cyl
(135,00 € HT)
Segment set Standard 88mm 2x2x4.5x4.5 Renault Fregate
Set of 16 segments for 4 eyebolts dimension 88 mm - 668 or 671 Renault petrol engine.composition per piston:2 x compression in 2 mm2 x scraper in 4.5 mmPossibility of ordering in 85 mm (call us)
(124,85 € HT)
Set of segments STD 85.50, oversize 0.50 mm Renault Fregate
Set of 16 segments for 4 pistons, special dimension 85.50 mm reaming - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 3 mm2 x scraper in 4.5 mmPossibility of ordering in 85 mm (call us)
(133,25 € HT)
Set of custom 4-groove piston rings Ford or Simca V8
Set of segments for V8 Ford Vedette, Vendôme, Simca Trianon, Versailles, Régence, Beaulieu, Chambord, Présidence, Marly 1 and 2, Ariane 8.For 4-groove piston, all dimensions, do not hesitate to contact us 033 4 42 57 79 06 for estimate.(Price ...
(280,00 € HT)
Jeu de 3 Segment Ø 67.50 x 4.00 racleur 948 EX
(62,00 € HT)
Set Segments Ø 57.00 2x2x2x4 - Rosengart LR (set of 16)
Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 57.50. Be careful in case of error on your part, these products cannot be taken back.Please note that fitting current rings may require modifying the depth of ...
(199,17 € HT)
Set Segments Ø 58.00 2x2x3x3 - Rosengart LR (set of 16)
Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 58. Attention in case of error on your part, these products cannot be taken back.- 8 x compression h 2mm- 8 x scraper h 3 mmContact us for other sizes.
(199,17 € HT)
Segment clearance Ø 72 mm - 3 x 2.5 x 2.5 x 4 - Simca 9 - Aronde
Set of 16 segments for 4 pistons dimension Ø 72 mm - Simca 9 or Aronde enginecomposition per plunger:4 x fire segment 2.5 mm8 x compression in 3 mm4 x scraper in 4 mmPossibility to order in 85 mm (call us) - Non-contractual photo
(103,00 € HT)
Set of segments Ø 69.50 mm - 3x2.5x2.5x4
Ring set Ø 69.50 mm to equip 4 pistons with 4 grooves:- 3x2.5x2.5x4Non contractual photo
(149,96 € HT)
Segment set 2.5 * 2.5 * 4.5 - 93 mm - Diesel engine
Piston ring set Ø 93 mm8 x Piston ring 93 x 2.5 x 4 C1 - Rectangular section, uncoated.4 x Piston ring 93 x 4.5 x 4.2 WO25 - Spring scraper - Axial dimension 4.5 mm
(175,00 € HT)
Segment set Ø 56.00 2x2x3.5x3.5 - Rosengart LR (set of 16)
Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 56.00- 2 x compression h 2mm- 2 x scraper h 3.5 mmContact us for other dimensions.
(199,17 € HT)
Set of piston rings 4 grooves Ø66.04 - 2x2x4x4 - Ford Vedette
Piston ring set Ø 66.04 - for Ford Vedette V8.For piston with 4 grooves, 2x2x4x4. Includes:- 16 compression segments 2 mm high- 16 scraper segments 4mm highNon contractual photo
(280,00 € HT)
Segment set Ø 74 mm Simca 2.5x2.5x2.5x4 - 4cyl
Segment set Ø 74 mm Simca 2.5x2.5x2.5x4 - 4cyl
(75,00 € HT)